closing tag is in template navbar
timefactors watches



TZ-UK Fundraiser
Page 30 of 84 FirstFirst ... 2028293031324080 ... LastLast
Results 1,451 to 1,500 of 4164

Thread: TZ Cycling/Bike Appreciation thread!

  1. #1451
    Quote Originally Posted by bry nylon View Post
    ^^ hope it does not put you off... You have a smaller contact patch on a road bike and with frosty or thawing roads plus maybe extra risk of diesel on roundabouts you cannot lean them as much as you might be used to on your mtb..
    It’s a bit late telling me now


    Sent from my iPhone using Tapatalk

  2. #1452
    Craftsman
    Join Date
    Jul 2014
    Location
    pride of the north
    Posts
    961
    Quote Originally Posted by mk1974 View Post
    Decided to buy new as I wasn’t sure what size I needed and didn’t want the hassle of buying a second hand piece of junk.had it a week but only managed to go on it today,never had a road bike before,I new it would be an harder ride than the mtb,also found out that they don’t grip like an mtb,when I lost the front end on a roundabout,nothing broken but the knees and wrists are sore.


    Sent from my iPhone using Tapatalk
    bought mine new and did 14 miles to doctor and back, haven't been on it since. So uncomfortable and riding style not for me, sticking to mtb. The positive way I'm looking at it is more pedalling involved = more energy used = more calories burned, oh and best of all don't have to wear lycra and those silly shoes :)

  3. #1453
    Craftsman
    Join Date
    Jul 2011
    Location
    Here & There
    Posts
    899

    TZ Cycling/Bike Appreciation thread!

    Just picked up a little project in advance of summer. Wanted this exact model for years!

    Photo taken immediately after purchase. Starting to think about a few minor tweaks and the optimum set up.

    Last edited by Progressive; 21st January 2019 at 10:24.

  4. #1454
    Master
    Join Date
    Apr 2016
    Location
    Yorkshireman at heart
    Posts
    3,128
    Blog Entries
    2
    Quote Originally Posted by Progressive View Post
    Just picked up a little project in advance of summer. Wanted this exact model for years!

    Photo taken immediately after purchase. Starting to think about a few minor tweaks and the optimum set up.

    That's cool. Iconic really.

  5. #1455
    Quote Originally Posted by trident-7 View Post
    That's cool. Iconic really.
    I remember when they came out - almost futuristic with the carbon ‘lugs’.

    I’ve just (almost) finished my new bike...

    A5D50D2F-070E-4A9E-8781-A62BDAB4E610 by anthonyjholden, on Flickr

    Just need to bleed the brakes and the dropper, sort out the fork and helitape the steerer tube and it’ll be good to go. Such an easy build - external cabling, threaded BB... the toughest thing has been getting the tyres to seat tubeless (I gave up and stuck tubes in for the moment).

  6. #1456
    Master
    Join Date
    Apr 2016
    Location
    Yorkshireman at heart
    Posts
    3,128
    Blog Entries
    2
    Quote Originally Posted by bry nylon View Post
    ^^ hope it does not put you off... You have a smaller contact patch on a road bike and with frosty or thawing roads plus maybe extra risk of diesel on roundabouts you cannot lean them as much as you might be used to on your mtb..
    It's mainly what's on the roads that makes them slippery. In particular the grit that's used. It leaves a greasy residue, especially that stuff with molasses in it. Then there's loose material, leaves, algae, & Diesel fuel on corners. If it wasn't for this, the traction is pretty good. Also you can't hydroplane a bike tyre.

    Best way is to expect it to be slippery on corners. Adjust your speed accordingly. Shift your weight towards the side your moving towards & try & keep the bike more upright. Keep your body weight hard down on the opposing side pedal, which lowers the centre of gravity of you & the bike

    Picture below is from last week, on a purpose built cycling circuit which is ungritted & has had no vehicles on it. It's been raining & the Tarmac is still wet. Tyres have 112 psi of pressure in them & I'm going around a hairpin at about 27mph. It felt plenty grippy enough.


  7. #1457
    Quote Originally Posted by LRB255 View Post
    bought mine new and did 14 miles to doctor and back, haven't been on it since. So uncomfortable and riding style not for me, sticking to mtb. The positive way I'm looking at it is more pedalling involved = more energy used = more calories burned, oh and best of all don't have to wear lycra and those silly shoes :)
    My thoughts exactly. I bought a cheap drop-bar to compete in sprint triathlons this last year, and while it is fine for that I much prefer the riding style and comfort of MTB for my part-offroad regular commute. The roads around here (Dorset) are so utterly pants and the drivers selfish and impatient, that you can't be watching the road all the time on a skinny-wheeled bike, just takes all the fun out of it. MTB all the way for me.

  8. #1458
    Master
    Join Date
    Oct 2008
    Location
    south of the river..
    Posts
    1,876
    [QUOTE=trident-7;5002033]It's mainly what's on the roads that makes them slippery. In particular the grit that's used. It leaves a greasy residue, especially that stuff with molasses in it. Then there's loose material, leaves, algae, & Diesel fuel on corners. If it wasn't for this, the traction is pretty good. Also you can't hydroplane a bike tyre.

    Best way is to expect it to be slippery on corners. Adjust your speed accordingly. Shift your weight towards the side your moving towards & try & keep the bike more upright. Keep your body weight hard down on the opposing side pedal, which lowers the centre of gravity of you & the bike

    Picture below is from last week, on a purpose built cycling circuit which is ungritted & has had no vehicles on it. It's been raining & the Tarmac is still wet. Tyres have 112 psi of pressure in them & I'm going around a hairpin at about 27mph. It felt plenty grippy enough.


    Fair play to you trident - you run higher pressures than I do and you're banked over considering the still wet circuit and speed

  9. #1459
    Picture below is from last week, on a purpose built cycling circuit which is ungritted & has had no vehicles on it. It's been raining & the Tarmac is still wet. Tyres have 112 psi of pressure in them & I'm going around a hairpin at about 27mph. It felt plenty grippy enough.
    and if you lowered your pressure you would have less rolling resistance. high pressures only make sense on billiard table smooth velodromes.
    get down and look at tarmac, its actually very rough and if you get really close it’s just like a mountain range with many peaks and troughs, lower pressures (and high TPI carcasses, tubs or tubeless) mean the tyre can deform easily instead of bumping over the micro sized lumps of tarmac which is not energy efficient.

    the days of 22c’s pumped up to the max are gone, they belong in the past with the steak and eggs for breakfast on raceday, EPO and right angled cranks.

    bigger deformable and more compliant carcasses run at lower pressures mean less effort and more speed, they are even more aero if the wheel rim is designed to work with a fatter tyre.

  10. #1460
    Craftsman
    Join Date
    Dec 2017
    Location
    Yorkshire
    Posts
    334


    Current ride.


    Sent from my iPad using Tapatalk

  11. #1461
    Craftsman
    Join Date
    Jul 2014
    Location
    pride of the north
    Posts
    961
    Quote Originally Posted by catch21 View Post
    My thoughts exactly. I bought a cheap drop-bar to compete in sprint triathlons this last year, and while it is fine for that I much prefer the riding style and comfort of MTB for my part-offroad regular commute. The roads around here (Dorset) are so utterly pants and the drivers selfish and impatient, that you can't be watching the road all the time on a skinny-wheeled bike, just takes all the fun out of it. MTB all the way for me.

  12. #1462
    Craftsman
    Join Date
    Jul 2014
    Location
    pride of the north
    Posts
    961
    Quote Originally Posted by MarkJS View Post


    Current ride.


    Sent from my iPad using Tapatalk
    now that is proper bike porn

    Where about's in the UK is that

  13. #1463
    Craftsman
    Join Date
    Dec 2017
    Location
    Yorkshire
    Posts
    334
    Quote Originally Posted by LRB255 View Post
    now that is proper bike porn

    Where about's in the UK is that
    Cheers! It's above Wessenden Head and not far from Marsden in West Yorkshire. The other bike is my mates Transition Scout Carbon.

  14. #1464
    Craftsman Dean Learner's Avatar
    Join Date
    Jan 2019
    Location
    Australia
    Posts
    299


    Just thought I’d introduce myself here as this is more likely where I’ll fit in as bikes come first, though I’m finding a similar addiction in watches now as I enjoy the machinery and mechanics of both.

    Been a keen rider for a long time and will ride pretty much anything on two wheels as the photo above shows. Road tripped with mountain bikes all over (NZ, Australia) and had some great climbing “holidays” on the road bike (Italy, France, Spain, Austria).

    Currently enjoying teaching the next generation and building their passion



    Very comfortable with the mechanics of these simple machines and have built and modified a range of bikes over the years, almost feels like the tinkering is more of a hobby than riding at times.

    I’ve only really just come to terms with the fact I’m also a fan of watches and really enjoying the research phase at the moment and seeing how deep the rabbit hole goes!! Not sure I’ll ever build a big watch collection (currently only have two, Tissot and mondaine and both with sentimental value). I have one or two watches in my sights but can also see myself tinkering and modding a few as the passion grows.

    In the meantime I’ll be riding whenever I can and enjoying this new phase of watch appreciation.

  15. #1465
    Master
    Join Date
    Oct 2008
    Location
    south of the river..
    Posts
    1,876
    Hello Dean, welcome to the forum, that's an impressive stable of bikes you have there

  16. #1466
    Craftsman
    Join Date
    Jul 2014
    Location
    pride of the north
    Posts
    961
    Quote Originally Posted by MarkJS View Post
    Cheers! It's above Wessenden Head and not far from Marsden in West Yorkshire. The other bike is my mates Transition Scout Carbon.
    Lovely part of the world

  17. #1467
    Craftsman
    Join Date
    Jul 2014
    Location
    pride of the north
    Posts
    961
    Welcome Dean, and a nice healthy collection of bikes there. Maybe some knee pads for the wee fella next on the list

  18. #1468
    Craftsman
    Join Date
    Dec 2017
    Location
    Yorkshire
    Posts
    334
    Quote Originally Posted by LRB255 View Post
    Lovely part of the world
    It is. Are you from around there? I'm around 8 miles away as the crow flies.

    And, love the 'bike lair' Dean...

  19. #1469
    Craftsman
    Join Date
    Jul 2014
    Location
    pride of the north
    Posts
    961
    Quote Originally Posted by MarkJS View Post
    It is. Are you from around there? I'm around 8 miles away as the crow flies.

    And, love the 'bike lair' Dean...
    No not from that area but travelled round that area with work - I'm on the edge of the Lake District (Kendal area) so equally as nice

  20. #1470
    Craftsman Dean Learner's Avatar
    Join Date
    Jan 2019
    Location
    Australia
    Posts
    299
    Thanks for the welcomes.

    I enjoy my bike lair, though it pales on their old location where I had a whole room for them. Sadly I’ve just sacrificed that space to be a kids play room instead of my play room, the joys of parenthood.

    The little fella has requested a full face as well so sure I can throw in some knee pads too. The thing is with those little ones is they bounce, not a drop of blood
    (or tears) from that incident. Once he was dusted off he was straight off again

  21. #1471
    Craftsman
    Join Date
    Jul 2011
    Location
    Here & There
    Posts
    899

    TZ Cycling/Bike Appreciation thread!

    Quote Originally Posted by Progressive View Post
    Just picked up a little project in advance of summer. Wanted this exact model for years!

    Photo taken immediately after purchase. Starting to think about a few minor tweaks and the optimum set up.




    Made some progress on my old school summer bike this weekend... New saddle, seat post, cables and bar tape. Looks a bit fresher now.

    Not too keen on the red tires (nor the 23c width) but they’re brand new Continental GP4000’s. Seems a bit daft to scrap them.
    Last edited by Progressive; 10th February 2019 at 18:29.

  22. #1472
    Master
    Join Date
    Jul 2011
    Location
    North Wales
    Posts
    4,072
    Gp4000 are good tyres, just check when you ride that they are A holding pressure and B not cracking on the side walls

    Ps loving the seat post height, you must be a tall person

  23. #1473
    Craftsman
    Join Date
    Jul 2011
    Location
    Here & There
    Posts
    899
    Quote Originally Posted by higham5 View Post
    Gp4000 are good tyres, just check when you ride that they are A holding pressure and B not cracking on the side walls

    Ps loving the seat post height, you must be a tall person
    Above average height, long legs but short upper body! Makes my bikes look ridiculous but (kind of) works alright!

  24. #1474
    Master
    Join Date
    Jul 2011
    Location
    North Wales
    Posts
    4,072
    Quote Originally Posted by Progressive View Post
    Above average height, long legs but short upper body! Makes my bikes look ridiculous but (kind of) works alright!
    Always a good sign to see lots of seatpost showing, Im from an MTB background and I shudder to see riders with 50 mm showing and completely stretched out to the bars.

  25. #1475
    Quote Originally Posted by higham5 View Post
    Always a good sign to see lots of seatpost showing, Im from an MTB background and I shudder to see riders with 50 mm showing and completely stretched out to the bars.
    But MTB sensibility’s mean nothing on road bikes.
    as somebody who rides both I will readily ride a MTB on the smaller side and get the benefits on the twisty stuff but with a road bike fit is paramount and because a lot of frames are now sold with fairly large gaps in between sizing there is more likely to be more or less seatpost showing.
    Even with 1cm increments you can end up with lots or very little post.
    I’m 6ft 1 but with short legs and long torso, I ride a 56cm non sloping frame (565 effective top tube) but with a 130 stem. Great handling and weight distribution but when you look at the bike without the pilot the saddle looks too low (despite it fitting perfectly and me using the tops/hoods and drops without issue with negative stem and only one 5mm spacer)

  26. #1476
    Craftsman
    Join Date
    Nov 2017
    Location
    Cambridge
    Posts
    347
    Whereas I, at around average height, ride a small road bike and large or extra large mountain bike (typically look for 590mm ish reach).
    As a mountain biker at heart, I have experimented a lot to get to this set up. The stability the extra length gives you when flat out through the rough stuff, or in the air, is game changing. Confidence grows massively since the attitude of the bike is far less affected by the rider pitching forwards and back on top.
    A small pay off when in the tight stuff inevitably but easily overcome with some exagaeratted body English I find.
    As for the small road bike, well I've no idea on that one. Tried a 52cm frame expecting it to feel cramped, but it doesn't. Just very responsive. Maybe I could go up a size but I am far less fussy about the road bike. Just goes to show that we each need to try these things ourselves to find what works best for us.

    Sent from my SM-A320FL using TZ-UK mobile app

  27. #1477
    Master
    Join Date
    Apr 2016
    Location
    Yorkshireman at heart
    Posts
    3,128
    Blog Entries
    2
    Quote Originally Posted by MrSmith View Post
    But MTB sensibility’s mean nothing on road bikes.
    as somebody who rides both I will readily ride a MTB on the smaller side and get the benefits on the twisty stuff but with a road bike fit is paramount and because a lot of frames are now sold with fairly large gaps in between sizing there is more likely to be more or less seatpost showing.
    Even with 1cm increments you can end up with lots or very little post.
    I’m 6ft 1 but with short legs and long torso, I ride a 56cm non sloping frame (565 effective top tube) but with a 130 stem. Great handling and weight distribution but when you look at the bike without the pilot the saddle looks too low (despite it fitting perfectly and me using the tops/hoods and drops without issue with negative stem and only one 5mm spacer)
    You'd make a good Tester with that morphology.

  28. #1478
    Has anyone ever bought a Canyon bike and not waited 6 months for one? I'm looking at buying a gravel type bike with wide(ish) tyres that will cope with our crappy roads and the odd blast through forest trails. The aluminium Canyon Grail looks to be very well spec'd but has a long lead time (around 5 months). I would rather walk into an LBS and try a bike and ride it away a couple of days later but from recent experience, the LBS' very rarely have stock in the size you want. I've looked at the Specialized Diverge but the spec. in comparison with the Grail is stingy to say the least. The geometry between the two is very different too. The welds on the Canyon look like they were done by day 1 of welding school though. They're huge. The likes of the Boardman ADV8.9 look almost like a carbon bike with smooth welds in comparison to the Canyon.

  29. #1479
    Craftsman
    Join Date
    Nov 2017
    Location
    Cambridge
    Posts
    347
    Can't help on Canyon lead time.
    Have ridden a Diverge extensively tough, and despite the relatively modest spec found it to be a very comfortable and deceptively quick ride.

    Sent from my SM-A320FL using TZ-UK mobile app

  30. #1480
    Craftsman Dean Learner's Avatar
    Join Date
    Jan 2019
    Location
    Australia
    Posts
    299
    Quote Originally Posted by doubledee View Post
    Has anyone ever bought a Canyon bike and not waited 6 months for one?
    No personal experience but plenty of anecdotes. Delivery really relates to stock and availability. Plenty of stories of bikes within a week if they’re sitting in a warehouse in your country but if there’s new/transition models you’ll be waiting. I believe the canyon gravel bikes are a pretty new model so still getting stock sorted.

    As an alternate option how about one of these https://www.cannondale.com/en/USA/Pr...4-08b7d8ceda67. Certainly ticks the all boxes as far as I’m concerned and will be a high contender when my commuter needs an update.

  31. #1481
    Grand Master thieuster's Avatar
    Join Date
    Mar 2009
    Location
    GMT+1
    Posts
    11,749
    Blog Entries
    8
    I've seen that Topstone in IRL. A very interesting concept! It's a mix of all useful elements of various types of bike. Worth checking it out.

    Menno

  32. #1482
    I've seen the Sora model in green but it was the wrong size. The 105 model with hydraulics is in short supply as well. Some online retailers are quoting June 2019 for delivery. I intend speaking to my LBS about the Topstone. I think the main differences between the Sora and 105 models are the 105 model has better wheels and different tyres. I did consider buying one of the base model E5 Diverges or something like the Topstone Sora and then upgrade the bits as they wear out. I am not a fan of mechanical discs but people reckon that the modern ones aren't too bad but hydraulics are just better. I think Decathlon are about to launch a gravel version of the RC520 but it has the hybrid hydraulic system.

  33. #1483
    Master
    Join Date
    Aug 2018
    Location
    Surrey, U.K.
    Posts
    1,499
    A BSA bb as well! Unusual and welcome from Cannondale.

  34. #1484
    Master
    Join Date
    Jun 2007
    Location
    Berkshire, UK
    Posts
    4,331
    Have you looked at Planet X - they seem popular on the CX scene is an inexpensive starting point? They have SRAM 1x drive which seems the way things are going - I have it on my cross bike and really like it.


    Sent from my iPhone using TZ-UK mobile app

  35. #1485
    Master Mouse's Avatar
    Join Date
    Feb 2014
    Location
    North by Northwest
    Posts
    3,119

    Stolen Goat discount code

    As a previous customer (and a happy one at that) I have just been sent a discount code for Stolen Goat clothing. Watches have broken the bank at the moment, so I'm not going to be buying any more cycling stuff for a while!

    £10 discount. Single use. Valid for purchases over £50.

    If this is of genuine use to anyone, then please pm and I'll forward the code.

    Cheers

  36. #1486
    Craftsman
    Join Date
    Jul 2017
    Location
    london
    Posts
    298
    That Trek looks lovely, what year is it?

  37. #1487
    Master Red Steve's Avatar
    Join Date
    May 2008
    Location
    Sunny Bristol
    Posts
    4,137
    ..my current Winter ride. Not as sexy as my full carbon Rose with Hunt rims but in this weather I know what I prefer to ride ;-)

    IMG-20190209-WA0001 by Steve Bolt, on Flickr

  38. #1488
    Quote Originally Posted by trident-7 View Post
    You'd make a good Tester with that morphology.
    i look like a cyclist, sit ‘in’ the bike not on it. and observe all the style points and dont ride like a bag of spanners (froome)
    unfortunately the genetics i was dished out have not produced a engine to match!

    i used to ride socially with some 1’s 2’s and an age cat winner of the Bec hillclimb and if i had a good run of a few months uninterrupted training miles i could hang with them but it was accepted i never did much work on the front. got dropped on many ride but they really improved my fitness. i would only ever be a mid pack cat 4 if i ever raced.

    My old flatmate is lead coach at Lee Valley velodrome and did say i would do well on hilly time trials but i never fancied proving him right/wrong.
    cycling is my stress release so racing never appealed the fitness and social side or having my own targets is enough for me.

  39. #1489
    Master
    Join Date
    Jul 2011
    Location
    North Wales
    Posts
    4,072

    New to me classy 2010 Yeti 575

    Collected this today , full XTR plus Yumeya tuning kit. Only done 300 miles from new . Lots of garage work today cleaning , bleeding brakes and just understanding the Fox shock system. Looking forward to getting out on some trails soon


  40. #1490
    Grand Master magirus's Avatar
    Join Date
    Nov 2003
    Location
    Up North hinny
    Posts
    39,473
    Quote Originally Posted by higham5 View Post
    Collected this today , full XTR plus Yumeya tuning kit. Only done 300 miles from new . Lots of garage work today cleaning , bleeding brakes and just understanding the Fox shock system. Looking forward to getting out on some trails soon


    Nice machine. Good to see a bike with decent gearing, I don't know how folks ride the bikes I see with a tiny single chainring.
    F.T.F.A.

  41. #1491
    Master
    Join Date
    Jul 2011
    Location
    North Wales
    Posts
    4,072
    Quote Originally Posted by magirus View Post
    Nice machine. Good to see a bike with decent gearing, I don't know how folks ride the bikes I see with a tiny single chainring.
    The new 12 speed single front ring are supposed to be very good and give you 90 plus percent of a 27 speed triple. The main advantage is a simplified chain line eg just one ring. BUT the rear spider / cassettes are massive.

    One day Rholloff will develop there internal hub gears to fully mirror mtb gears , even now they are £1000 for the hub alone. When they do I will invest in one of those with a belt drive, therefore zero maintenance 🚴🏽*♂️👍

  42. #1492
    Master Chris W's Avatar
    Join Date
    Feb 2006
    Location
    Staffordshire, UK
    Posts
    2,053
    Not really a bike but close enough I think for this thread.
    Picked up a Mountain Trike off-road wheelchair for my wife a few weeks back.
    Tidy bit of kit and really well thought out.
    Has 3 RockShox Monarch shocks, hydraulic brakes on both wheels - both calipers controlled by 1 lever, 24" MTB wheels & tyres and a 12 wheel at the back for stability and steering.



    Currently gearing is 22t/22t so quite sedate - spoke to Mountain Trike and am changing the front rings to 26t for a bit more speed and still keeping decent hill climbing ability.

    Sent from my moto x4 using Tapatalk
    Last edited by Chris W; 2nd March 2019 at 22:50.

  43. #1493
    Grand Master magirus's Avatar
    Join Date
    Nov 2003
    Location
    Up North hinny
    Posts
    39,473
    Quote Originally Posted by higham5 View Post
    The new 12 speed single front ring are supposed to be very good and give you 90 plus percent of a 27 speed triple. The main advantage is a simplified chain line eg just one ring. BUT the rear spider / cassettes are massive.

    One day Rholloff will develop there internal hub gears to fully mirror mtb gears , even now they are £1000 for the hub alone. When they do I will invest in one of those with a belt drive, therefore zero maintenance *♂️
    I'm still on 24 speed, XTR/XT mix with Suntour XC Pro thumbies, with an 11/28 cassette and 22/34/44 up front. I've been looking into updating the gearing on the bike, built on a Kona HeiHei ti frame with Pace rigid carbon forks, I'm looking at a 10 or 11 speed double. I fitted a ground anchor for a pal in his garage recently to lock his Thorn tourer to, which has a Rholloff rear hub. I was very impressed with how the gears work and the low maintenance for the hub, and the expected longevity of the chain.
    F.T.F.A.

  44. #1494
    Master
    Join Date
    Jul 2011
    Location
    North Wales
    Posts
    4,072
    That mountain bike trike off road looks the business. Some thought has gone into the design of that. A great way to see the outdoors without barriers, brilliant

  45. #1495
    Finally got out on the Cotic and I love it... a 29" hardtail with 130mm forks is pretty much perfect for the XC stuff round here. Although I think the pedals clash with the paint a little.

    Personally, I wouldn't put anything other than Eagle on any new bike I was building. The 1x system with massive cassette gives you all the range you need and you can put the dropper control in a sensible place too. It's a bit more sensitive to set up (particularly the b-screw) than a 2x system but once you've got it dialled it's brilliant.

    C7C6343B-F8ED-4F1C-A0BB-6F142502D74A by anthonyjholden, on Flickr

  46. #1496
    Master
    Join Date
    Sep 2014
    Location
    St. Albans, england
    Posts
    1,077

    Hardtail advice please

    Hi,

    Could I have some advice please. I'm spending more and more of my cycling time moving from road to off road and have been saving to buy a new bike.

    Having ridden a few friends bikes what I know I want is a hardtail 29er that will mainly be used for trail and XC.

    I wont be screaming down hills or flying through the air off big jumps.

    I've been saving and have what I hope is a fairly decent budget (£2-2.5k). My shortlist so far is
    - Santa Cruz Chameleon
    - Identiti AKA
    - Orange Crush Pro
    - Felt Doctrine (this may be a bit too focussed towards XC)

    Are there any owners of the above here who could give me a view how they ride and are there any other brands I should be considering.

    My aim is to try and test ride a shortlist of 3-4 bikes if I can.

    Any help gratefully appreciated

    Cheers
    David

  47. #1497
    Craftsman
    Join Date
    Jul 2014
    Location
    pride of the north
    Posts
    961
    Quote Originally Posted by David r View Post
    Hi,

    Could I have some advice please. I'm spending more and more of my cycling time moving from road to off road and have been saving to buy a new bike.

    Having ridden a few friends bikes what I know I want is a hardtail 29er that will mainly be used for trail and XC.

    I wont be screaming down hills or flying through the air off big jumps.

    I've been saving and have what I hope is a fairly decent budget (£2-2.5k). My shortlist so far is
    - Santa Cruz Chameleon
    - Identiti AKA
    - Orange Crush Pro
    - Felt Doctrine (this may be a bit too focussed towards XC)

    Are there any owners of the above here who could give me a view how they ride and are there any other brands I should be considering.

    My aim is to try and test ride a shortlist of 3-4 bikes if I can.

    Any help gratefully appreciated

    Cheers
    David
    Thanks David, will follow this closely. Looking to go hardtail myself as going to move my road bike on as don't gel with road side of this hobby

    Quick look at the Orange P7 the other week (no test ride though) and looked a really nice setup, haven't seen any of the others but also like the look of Meesterbond's Cotic

  48. #1498
    Master
    Join Date
    Apr 2004
    Location
    Harrow
    Posts
    4,399
    Quote Originally Posted by David r View Post
    Hi,

    Could I have some advice please. I'm spending more and more of my cycling time moving from road to off road and have been saving to buy a new bike.
    My aim is to try and test ride a shortlist of 3-4 bikes if I can.
    Any help gratefully appreciated

    Cheers
    David
    Look at both Canyon and Giant. You can test ride the former at their open day 17th March, and again at the London Bike show the end of the month.

  49. #1499
    In spirit of recommending what you ride then my Cotic SolarisMax would seem perfect! It'll take 29s or 27.5+ wheels, 120/130/140 forks. Absolutely perfect for hooning around the woods.

    £2600 gets you a pretty similar build to mine, just with a slightly better fork... which now I've ridden it a bit is the one area I wished I'd spent a bit more on. I've got the X Fusion McQueen with the basic damper, the Gold build on the Cotic site comes with a McQueen with High and Low speed Compression damping. £2k saves a bit on groupset and forks but you can use the website to configure what you need.

    I've just been out in the local hills on mine this morning and I'm loving it more and more... the geometry is the biggest difference between the Cotics and most other hardtail out there. Really long top tube and a short stem combined with slack head angle means you get loads of stability but without losing the agility - if you want to get really geeky about why it works there's an interesting (well I thought it was interesting) interview with Cy Turner of Cotic here: https://www.cotic.co.uk/news/2018/downtimelongshot

    Of the ones you mentioned, the new Santa Cruz is where I'd go next. The Identiti looks like a bit too much of a hooligan for long days out, more of a play bike. Can't get excited about the Orange Crush or Felt.

    If you're in the South East then Bird is another make worth looking at. Their new Zero 29 is worth a look... good value too and the guys at Bird are great to deal with.

    But who am I kidding... get the Cotic, they rock! If you want to try one then they do demo days - they have a demo van that travels up and down the country.

  50. #1500
    Master Chris W's Avatar
    Join Date
    Feb 2006
    Location
    Staffordshire, UK
    Posts
    2,053
    Postman has been busy today...



    RockShox Yari 650B 160mm Forks


    Some Stealth graphics


    Nukeproof Neutron wheels 650B


    2017 Nukeproof Mega Frame


    Will be swapping the 10 speed SLX kit of my current 26" Nukeproof Mega for the time being until it wears out and then swap to 11 speed XT.

    Sent from my moto x4 using Tapatalk
    Last edited by Chris W; 27th March 2019 at 13:41.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Do Not Sell My Personal Information