closing tag is in template navbar
timefactors watches



TZ-UK Fundraiser
Page 1 of 2 12 LastLast
Results 1 to 50 of 55

Thread: Turntables

  1. #1
    Grand Master
    Join Date
    Apr 2008
    Location
    hull
    Posts
    13,456

    Turntables

    My venerable Linn Axis is reaching the end of its days, and there are no local service agents left for them round here so into the minefield for a replacement I go! My thoughts are to look for a decent used deck £200-400 but any thoughts on what to look for or maybe a good quality newbie?
    ktmog6uk
    marchingontogether!



  2. #2
    Rega seem to be the favourite these days. My P2 has been fine

    Sent from my M2101K6G using Tapatalk

  3. #3
    Another vote for Rega, i have Planar 3 which i bought secondhand within your budget. Pro-ject seem to offer a lot for the money, a bit of a budget Rega.

  4. #4
    Master
    Join Date
    Oct 2012
    Location
    Wynyard
    Posts
    4,333
    Regs Planer here, top notch.


    Sent from my iPhone using Tapatalk

  5. #5
    Master
    Join Date
    Oct 2007
    Posts
    3,052
    Blog Entries
    1
    Rega and Project seem to dominate that price point

  6. #6
    Master
    Join Date
    Nov 2017
    Location
    Down south jukin
    Posts
    5,434
    Blog Entries
    1
    I have the Rega Planar 2 in white

    It has really improved my music system in both sound and my enjoyment.

    Much better than the rival with all the balancing things and the like.

  7. #7
    Grand Master Daddelvirks's Avatar
    Join Date
    Jul 2007
    Location
    Leiden- Netherlands
    Posts
    41,109
    Blog Entries
    1
    Try a professionally restored Lenco L75 sounds like a dream.
    Got a new watch, divers watch it is, had to drown the bastard to get it!

  8. #8
    Had my planar 3 for about 20 years, can't imagine replacing it, easily serviced, new belts are cheap and easy to fit. The cartridge will be the bit which evokes most discussion, I imagine.

  9. #9
    Quote Originally Posted by Daddelvirks View Post
    Try a professionally restored Lenco L75 sounds like a dream.
    Oh, now then, that was my first good deck, my fussy flatmate then allowed me to borrow his record ,now I had a good thing to protect them.

  10. #10
    Had my planar 3 for about 20 years, can't imagine replacing it, easily serviced, new belts are cheap and easy to fit. The cartridge will be the bit which evokes most discussion, I imagine.

  11. #11
    Master markl's Avatar
    Join Date
    Jun 2011
    Location
    Wigan
    Posts
    1,648
    Quote Originally Posted by ktmog6uk View Post
    My venerable Linn Axis is reaching the end of its days, and there are no local service agents left for them round here so into the minefield for a replacement I go! My thoughts are to look for a decent used deck £200-400 but any thoughts on what to look for or maybe a good quality newbie?
    Chris Books Audio in Warrington serviced my LP12 a year or so ago , and did a good job.


    Sent from my iPhone using Tapatalk

  12. #12
    Gotta be a pair of 1210s, shirley?

    Or is this the wrong thread?

  13. #13
    Master
    Join Date
    Oct 2007
    Posts
    3,052
    Blog Entries
    1
    Bravo on the 1's and 2's 😄

  14. #14
    Grand Master
    Join Date
    Jul 2007
    Location
    Wakefield, West Yorkshire
    Posts
    22,722
    Have you tried asking Fanthorpes in Hull if they know of anyone who services these?

    I would favour getting it restored if possible rather than replace it.

  15. #15
    Grand Master Rod's Avatar
    Join Date
    Jun 2003
    Location
    Co. Durham
    Posts
    10,403
    Quote Originally Posted by xxnick1975 View Post
    Rega seem to be the favourite these days. My P2 has been fine

    Sent from my M2101K6G using Tapatalk
    Second that. Rega P2 is a great sound. It'll take an upgrade for the cartridge for something like an Ortofon Red too

  16. #16
    Master
    Join Date
    Aug 2014
    Location
    Mountsorrel uk
    Posts
    2,015
    I had a linn axis 15 years ago even then there were problems getting spares and finding people to work on them back then, all the spares and expertise is for the lp 12s now I have a base model project and can’t tell any difference from the linn

  17. #17
    Master
    Join Date
    Apr 2004
    Location
    Harrow
    Posts
    4,433
    Replaced my Thorens TD150 (after nearly 50 years) with a Pro-Ject and certainly happy with the new one.

  18. #18
    Rega Planar 3 has done me (and my son) sterling service for over 20 years. We live literally 2 miles from the Linn factory in Waterfoot ;) and I’ve worked there for a couple of days, met the people who built LP12s.

  19. #19
    Grand Master blackal's Avatar
    Join Date
    Mar 2012
    Location
    Scottish Borders
    Posts
    10,911
    I still have my Linn Sondek with Akito arm - from around 1982

    don’t break out the vinyl as often as I should.

  20. #20
    Grand Master Rod's Avatar
    Join Date
    Jun 2003
    Location
    Co. Durham
    Posts
    10,403
    Back in the 80's when the Linn Sondek was out it was £69.95 plus arm and arm board. Fitted a lot of SME3009 arms with a Shure V15 cartridge to them.
    It was known in the trade as the 'Grim Condek'😁

  21. #21
    Grand Master Chris_in_the_UK's Avatar
    Join Date
    Nov 2004
    Location
    Norf Yorks
    Posts
    43,526
    Quote Originally Posted by Rod View Post
    Back in the 80's when the Linn Sondek was out it was £69.95 plus arm and arm board. Fitted a lot of SME3009 arms with a Shure V15 cartridge to them.
    It was known in the trade as the 'Grim Condek'
    They sold loads on the back of the hi-fi press swooning over them!
    When you look long into an abyss, the abyss looks long into you.........

  22. #22
    Master
    Join Date
    Jun 2007
    Location
    Berkshire, UK
    Posts
    4,378
    Quote Originally Posted by Rod View Post
    Back in the 80's when the Linn Sondek was out it was £69.95 plus arm and arm board. Fitted a lot of SME3009 arms with a Shure V15 cartridge to them.
    It was known in the trade as the 'Grim Condek'
    I'm pretty sure a LP12 in the 80's was way more than £69.95! My Rega Planar 3 from 1985 (which I still own ) was £250!

    I owned a late 70's LP12 with a SME3009 for a bit, but concluded my Thorens TD125 with TP16 tonearm sounded better, but some people say that the TP16 was actually a nicer sounding arm than the SME . The SME was of course heavily promoted by the UK press and a thing of great beauty in my opinion.

    Still have the Thorens and the Rega but need to sell one, the Rega was bought for me by father so will probably keep that even though the Thorens sounds much better.

  23. #23
    Grand Master
    Join Date
    Apr 2008
    Location
    hull
    Posts
    13,456
    Quote Originally Posted by walkerwek1958 View Post
    Have you tried asking Fanthorpes in Hull if they know of anyone who services these?

    I would favour getting it restored if possible rather than replace it.
    They don’t touch them, I last had it serviced about 10 years ago at The Audio Room on Savile Street but it looks like it’s closed down.
    Warrington is realistically too far for me as I don’t drive.
    I think the board is on the way out, needs to warm up for about 30 mins now before it runs at the correct speed, thought it was belt stretch but no difference with a newbie fitted😢
    ktmog6uk
    marchingontogether!



  24. #24
    Master Grandiloquence's Avatar
    Join Date
    Nov 2008
    Location
    Cheshire, UK
    Posts
    2,848
    Been looking for a reasonably priced deck myself recently. Somehow I have ended up with about 60 records and nothing to play them on! Popped in to Richer Sounds earlier today but the ones they had in stock were a bit underwhelming. I don't want Bluetooth or USB, I just want to plug it into my old Marantz amp and listen to some records!

  25. #25
    Quote Originally Posted by SimonH View Post
    I'm pretty sure a LP12 in the 80's was way more than £69.95! My Rega Planar 3 from 1985 (which I still own ) was £250!

    I owned a late 70's LP12 with a SME3009 for a bit, but concluded my Thorens TD125 with TP16 tonearm sounded better, but some people say that the TP16 was actually a nicer sounding arm than the SME . The SME was of course heavily promoted by the UK press and a thing of great beauty in my opinion.

    Still have the Thorens and the Rega but need to sell one, the Rega was bought for me by father so will probably keep that even though the Thorens sounds much better.
    Original price £59 in 1973, https://www.psaudio.com/blogs/copper...table-part-one.

  26. #26
    Master
    Join Date
    Aug 2014
    Location
    Mountsorrel uk
    Posts
    2,015
    Quote Originally Posted by ktmog6uk View Post
    They don’t touch them, I last had it serviced about 10 years ago at The Audio Room on Savile Street but it looks like it’s closed down.
    Warrington is realistically too far for me as I don’t drive.
    I think the board is on the way out, needs to warm up for about 30 mins now before it runs at the correct speed, thought it was belt stretch but no difference with a newbie fitted
    It was the board that was the problem on mine it used to judder on start up spent a fortune on it with 3 separate repairers replacing various components but couldn’t fix it and all the independent hi fi shops and repairers near me went out of business years ago

  27. #27
    Master
    Join Date
    Apr 2006
    Location
    Berkshire
    Posts
    5,190
    Quote Originally Posted by ktmog6uk View Post
    My venerable Linn Axis is reaching the end of its days, and there are no local service agents left for them round here so into the minefield for a replacement I go! My thoughts are to look for a decent used deck £200-400 but any thoughts on what to look for or maybe a good quality newbie?
    Whereabouts are you based? I have come across an old school hifi repairer that has done various work for me over the last few years. Maybe worth a try? He is based near Reading if that is any good to you?

  28. #28
    Grand Master Rod's Avatar
    Join Date
    Jun 2003
    Location
    Co. Durham
    Posts
    10,403
    To set up a Linn and it's suspension properly, a dealer needs a Linn jig to set it up to Linn standards. Seek out a specialist dealer

  29. #29
    Master
    Join Date
    Apr 2006
    Location
    Berkshire
    Posts
    5,190
    Quote Originally Posted by Rod View Post
    To set up a Linn and it's suspension properly, a dealer needs a Linn jig to set it up to Linn standards. Seek out a specialist dealer
    Fair enough!

  30. #30
    Master Tony's Avatar
    Join Date
    Mar 2010
    Location
    Teesside/Angola
    Posts
    2,367
    These folks have a turntable specialist who services turntables on the premises.

    It's an analaogue Aladdin's cave.

    https://hifivintage.co.uk/
    Last edited by Tony; 13th August 2023 at 19:05.

  31. #31
    Grand Master
    Join Date
    Apr 2008
    Location
    hull
    Posts
    13,456
    Quote Originally Posted by Rod View Post
    To set up a Linn and it's suspension properly, a dealer needs a Linn jig to set it up to Linn standards. Seek out a specialist dealer
    Looks like The Audio Room is in fact still in business, must have been having a refit or something when i went for a look a few weeks ago. the website has new updates so i'll enquiring this week. Still a Linn dealer too so there is still hope for it....must leave the credit card at home though when i take it in otherwise they'll tempt me into spending money on a Sondek, followed by a hospital bill and a divorce!
    For the curious it's on the same street as Blowers..... https://www.theaudioroom.co.uk
    ktmog6uk
    marchingontogether!



  32. #32
    Master
    Join Date
    Jun 2007
    Location
    Berkshire, UK
    Posts
    4,378
    Quote Originally Posted by Kingstepper View Post
    Yes no doubt but I'm fairly sure 1973 isn't in the '80s!

  33. #33
    Master RossC's Avatar
    Join Date
    Mar 2011
    Location
    Scottish Highlands
    Posts
    2,830
    I have a Fluance RT85, and can be had for £4XX from Amazon, usually.

    As standard it has an acrylic platter, Ortofon 2M Blue and it reviews very well. Outstanding value IMO.

  34. #34
    Grand Master blackal's Avatar
    Join Date
    Mar 2012
    Location
    Scottish Borders
    Posts
    10,911
    Quote Originally Posted by SimonH View Post
    Yes no doubt but I'm fairly sure 1973 isn't in the '80s!
    Trying to remember what year I bought the LP12 - probably around 1982 and if memory serves it was £386 bare, and £426 with the Basik arm and cartridge.

    I auditioned it against the Dunlop Systemdek, and while I admit - the dealer may have skewed the test towards Linn - it was and is, a fine turntable.

    Bought Meridian 101/103/psu amplification at the time too. Still got it all. Tempted to use the Meridian amps with the TV.

  35. #35
    Quote Originally Posted by blackal View Post
    Trying to remember what year I bought the LP12 - probably around 1982 and if memory serves it was £386 bare, and £426 with the Basik arm and cartridge.

    I auditioned it against the Dunlop Systemdek, and while I admit - the dealer may have skewed the test towards Linn - it was and is, a fine turntable.

    Bought Meridian 101/103/psu amplification at the time too. Still got it all. Tempted to use the Meridian amps with the TV.
    Bit of bargain really considering the time it's lasted and that they are about £20k now!

    Sent from my M2101K6G using Tapatalk

  36. #36
    Craftsman
    Join Date
    Aug 2005
    Location
    Cambridgeshire
    Posts
    688
    That price sounds about right; I bought my Pink Triangle PT1 in 1985 for £450 (£50 extra for rosewood) so the Sondek must have been £400 or so armless. Big pluses for me were that the it sounded better (to me) than the Sondek, and you could adjust the suspension yourself; no taking it back to the dealer for tuning. If you can find a PT1 now they are very reliable; mine is still going strong, and simple to service if you are happy to do it yourself.

    Outside of that, for your price range I would suggest a new or used Rega; there is a thriving ecosystem around them, so it is easy to find new belts, people to repair them, and plenty of upgrades if they take your fancy.

    -- Tim

  37. #37
    Master mondie's Avatar
    Join Date
    Nov 2014
    Location
    Llandudno (ex Oz)
    Posts
    3,670
    What is your budget for a replacement? Here's a couple at different price levels:

    A classic but lacks an arm. You may be over old decks after your Axis.

    https://www.hifiwigwam.com/threads/n...ntable.119638/

    A modern Kuzma at a great price, and for less than a Seamaster.

    https://www.hifiwigwam.com/threads/k...al-psu.121300/

    There are loads on eBay at all levels, I can't claim direct experience with most of them but am happy to help where I can.

  38. #38
    Grand Master
    Join Date
    Apr 2008
    Location
    hull
    Posts
    13,456
    Anyone got a Systemdek? Someone local to
    Me has one for sale and also buys old Linns, I’m tempted to px but not familiar with the brand…
    I’m
    Looking at a Systemdek IIX 900 turntable New Rega 220 tonearm, Audio Technica VM95E cart
    ktmog6uk
    marchingontogether!



  39. #39
    i gave all my vinyl and cd's away a long time a go , everything i have is in digital lossless format and has been for many years , i do like the look of the michel gyrodec but it would mean spending a fortune on vinyl for stuff i already have in digital form :/

  40. #40
    Grand Master blackal's Avatar
    Join Date
    Mar 2012
    Location
    Scottish Borders
    Posts
    10,911
    Quote Originally Posted by ktmog6uk View Post
    Anyone got a Systemdek? Someone local to
    Me has one for sale and also buys old Linns, I’m tempted to px but not familiar with the brand…
    I’m
    Looking at a Systemdek IIX 900 turntable New Rega 220 tonearm, Audio Technica VM95E cart

    Dunlop Systemdek came to being around 1980 and were up there with Linn, Pink Triangle, Ariston on quality. Like others - they have produced more affordable turntables since then.

    Not sure if you can arrange an audition of the turntable, but it should be good !

    https://www.vinylengine.com/turntabl...mdek&model=IIX

  41. #41
    Grand Master
    Join Date
    Apr 2008
    Location
    hull
    Posts
    13,456
    Quote Originally Posted by blackal View Post
    Dunlop Systemdek came to being around 1980 and were up there with Linn, Pink Triangle, Ariston on quality. Like others - they have produced more affordable turntables since then.

    Not sure if you can arrange an audition of the turntable, but it should be good !

    https://www.vinylengine.com/turntabl...mdek&model=IIX
    Cheers chap, plumped for a Rega Planer that was up for a decent price nearby, picking it up tomorrow. I’ll then take the Linn to the repairers and have a look at the Systemdek, if all goes well I’ll sell the Rega in a bit and either the Linn will come home fixed or be used in a deal for the Systemdek.
    ktmog6uk
    marchingontogether!



  42. #42
    Master wildheart's Avatar
    Join Date
    Aug 2008
    Location
    Essex - Hopefully on a golf course!
    Posts
    8,569
    You can have my old Thorens for well within your budget, it will need a service. I bought it back in 1974. As good or better than Rega back in the day. PM me if your interested

  43. #43
    Grand Master blackal's Avatar
    Join Date
    Mar 2012
    Location
    Scottish Borders
    Posts
    10,911
    Quote Originally Posted by ktmog6uk View Post
    Cheers chap, plumped for a Rega Planer that was up for a decent price nearby, picking it up tomorrow. I’ll then take the Linn to the repairers and have a look at the Systemdek, if all goes well I’ll sell the Rega in a bit and either the Linn will come home fixed or be used in a deal for the Systemdek.
    Quote Originally Posted by wildheart View Post
    You can have my old Thorens for well within your budget, it will need a service. I bought it back in 1974. As good or better than Rega back in the day. PM me if your interested
    He's listening to the rega by now, I reckon

  44. #44
    Grand Master
    Join Date
    Apr 2008
    Location
    hull
    Posts
    13,456
    Quote Originally Posted by blackal View Post
    He's listening to the rega by now, I reckon
    I am indeed, it’s better than I was expecting but not quite up to the Linn. After a bit of Googling it appears fitting a Rega 2 glass platter (about £50) changing cart to an AT n95 nude ( which I already have on the Linn) will yield good results. I’m yet to speak to the repair guy so
    Might do this and see where we are before making a decision, the Linn is about 40 years old after all and the Rega is just a year so tempted just to stick with it if the upgrades work.
    ktmog6uk
    marchingontogether!



  45. #45
    Master
    Join Date
    Jan 2015
    Location
    west midlands
    Posts
    2,278
    Apologies for going slightly off topic, does anybody know where I can get an old Quad FM4 tuner repaired?

  46. #46
    Master mondie's Avatar
    Join Date
    Nov 2014
    Location
    Llandudno (ex Oz)
    Posts
    3,670
    You won't find better than Graeme, based in Didcot

    https://www.ampregen.com/

  47. #47
    Master
    Join Date
    Jan 2015
    Location
    west midlands
    Posts
    2,278
    Quote Originally Posted by mondie View Post
    You won't find better than Graeme, based in Didcot

    https://www.ampregen.com/
    Fab, thanks very much

  48. #48
    Grand Master Rod's Avatar
    Join Date
    Jun 2003
    Location
    Co. Durham
    Posts
    10,403
    Quote Originally Posted by klunk View Post
    Apologies for going slightly off topic, does anybody know where I can get an old Quad FM4 tuner repaired?
    Send it to Quad in Huntingdon.

  49. #49
    Craftsman DONGinsler's Avatar
    Join Date
    Jan 2021
    Location
    Toronto
    Posts
    514
    Linn are not cheap anymore and a check on the company web site shows loads of retailers in the UK

    Somebody must be able to service it

    Email Linn and see if they recommend someone

    Loved TT's

    Best I had was an Systemdek llX with Infinity Black Widow TA. Used arm now costs more than I spent for the complete set
    Last edited by DONGinsler; 20th November 2023 at 17:23.

  50. #50
    Master
    Join Date
    Feb 2009
    Location
    Kitchen
    Posts
    1,466
    I bought a package a few years back via Gumtree which included a Revolver deck with Linn arm etc. I gave my Ariston to my son who is really into vinyl - both TTs are still going strong and sound OK to my aging ears

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Do Not Sell My Personal Information