I ‘think’ the CR 1632 will be 16mm across and the CR2020 will be 20mm across
The 1st part of the name is the diameter the second is the height so if the ‘hole is 20mm that’s probably right
Hi everybody hope you are all well
I’m in the middle off changing the battery on my tissot touch II and in the manual it read battery is a cr1632 but now I have removed the battery it’s a cr 2032
So question is what’s wrong the book or the battery that’s in it , a quick Google search looks as if the cr1632 is a small battery but that could be just a generic pictures I’m looking at
Any help would be great many thanks Andy (iceblue)
I ‘think’ the CR 1632 will be 16mm across and the CR2020 will be 20mm across
The 1st part of the name is the diameter the second is the height so if the ‘hole is 20mm that’s probably right
I think the original took a CR1632 and the 11 and expert take CR2032- I’m sure someone will confirm that
Found this, hope it's useful.
https://www.utmel.com/components/cr1...cation?id=1377
There's a wikipedia page which attempts to break down most of the coding. (As per International standard IEC 60086-3.)
https://en.wikipedia.org/wiki/Button_cell#Package_size
Thanks everyone so great usefully info getting a cr2032 today so will update once fitted
Just to update the thread
So after getting cr2032 and using latex gloves to put the battery in (thanks for the info guys ) it fits perfect the hardest part wasn’t fitting the battery is was synchronising the hand to the digital part lol