Be aware of dodgy sellers with "prototype" dials.
Looking at some pictures of the SM300 vintage watches with date and non date versions and a very lovely watch indeed, can anyone offer any advise on the pitfalls of trying to source/buy this particular model and any dealers/websites who offer these 2 models.
Thanks in advance
Be aware of dodgy sellers with "prototype" dials.
This is useful:
http://thatwatchandmore.blogspot.co....aster-300.html
If you definitely want vintage as well beware of the watchco versions out there. I have an SM300 built from service parts and it is obviously mint so be careful you don't mix these up with REAL vintage pieces.
I suppose the service part builds don't have serial numbers on the cases? I should know this owning one but I haven't looked.
Remember finding this useful at the time!
http://scubawatch.org/hallofshame.html
Thanks for the leads guys and sounds like a potential minefield out there for the inexperienced.
I don't suppose there is anywhere out there where one can see one in the flesh, I do travel round the UK a lot with my work so if anyone knows of a dealer who may have one to look at please feel free to let me know.
Thanks
I build one of new parts to get a "vintage" working diver watch. There is a lot of mixed up ones so if you looking
for a old one you have to be careful because it's easy to be ripped off.
Here is my one.
http://www.watchwallpapers.com/smrebe.htm
Jocke
Speechless, that's absolutely stunning you must feel tremendous satisfaction from completing this rebuild. May I ask how long it took from start to finish.
I`ve built a couple of these from new parts (with a rebuilt old movement) and they can be v. nice provided you accept them for what they are.
For me, you either want one extreme or the other, either a nice example bult from new parts OR a genuine vintage watch with nice patina and a good 'honest' feel about it. Watches with a mish-mash of new and old parts (possibly fake cases and dials) are the ones to avoid, neither fish nor fowl and definitely not desirable IMO.
If I really wanted an original version I`d accept that it won`t be cheap and I`d want good provenance to prove it's all kosher. Trying to buy at bargain prices is a recipe for disaster.
Paul
The website from fiddler69 is a fantastic resource. Thank you.
Hi Paul
Thanks for your valued thoughts, I am seriously considering going down this route. Don't know near enough re anything to do with building/sourcing parts etc. but like the idea of an example built from new parts and appreciate that an original version would be a. very expensive and b. a nightmare for the unskilled as myself in trying to source/secure a kosher one.
Thanks
Tommy
Great watches. One of the first watches I bought from SC was a watchco built SM300. Kinda miss it if I'm being honest.
Skip the watchco versions.
When you want a later version the link above really helps you out. However when you want a 165.014 or earlier model it is much harder to find a genuine one.
Almost all are frankenwatches..
My 165.014 has a very faded dial but is 100% original and comes with an extract (not for sale by the way). The extract is also helpful on these watches since these auto movements have been delivered to cheaper Omega's as well..
Check out following and good luck with your search:
http://forum.tz-uk.com/showthread.ph...litary-watches
Hi guys
Have been looking at a SM300 on chrono site, the watch is originally from the 70's, but most parts where changed by Omega about 10 years ago, movement is 565
Any advice or thoughts would be much appreciated.
http://www.chrono24.com/en/omega/ref-166024.htm
first one has case and hands replaced
the second one is almost entirely service parts (whether omega or not)
Good job
...and keep away from this one, a complete fake, with fake certificate/expertise ;-)
http://www.ebay.de/itm/OMEGA-SEAMAST...item4af04222a5
Thanks guys
Ive emailed the seller asking a few questions (re watch on bracelet) and he has verified - quote "every part has been changed except of the movement, so you get a „new“ watch"
I have replied back asking if he has proof of work carried out by Omega but all quite since this afternoon.
Is this watch worth a punt at this asking price?
Thanks in advance.
http://www.vintage-watches-collectio...document-1966/
This one looks kosher if the seller is to be believed...
It's not a vintage SM300, it's a vintage movement that's been built up into a watch by using modern new service parts, like Watchco do, nothing wrong with that, but it's far from a vintage watch.
Cheers..
Jase
Ah fully understand however it does look stunning. Have had a reply from the dealer who says it was the previous owner who had the work carried out.
Also there are no service documents to back this up with the dealer quoting "Our watchmaker (Omega Service Level 3) checked the watch and every part is genuine."
Should I proceed with caution or run for the hills ?
Thanks in advance
Depends what you want really, it's a nice watch, the parts are Omega, it just didn't come out of the Omega factory.
A straight up old original vintage SM300 will cost a fortune though.
If your happy with it being what it is then it will a great watch.
Cheers..
Jase
Mine is a parts watch. I bought the parts and a donor watch and sent them off to a watchmaker for service and assembly. I've had it 3 years now and still love wearing it. I enjoy it more than I did the modern Seamasters I have since sold off. A plus is this one has no date and no HE valve, both of which are worthless to me. I did sell off the 1171 bracelet, which I found a bit too lightweight and replaced it with a modern SMP bracelet which fits the watch well but not my wrist. The lack of micro adjustment is a huge failing on modern Omega bracelets IMO.
milwatch126 - saxon007
Both fine and stunning examples of which i could live with either. Like JasonM quoted I guess the vintage original (good condition) would be exceptionally more expensive.
The Chrono dealer selling the steel bracelet watch can confirm that parts are new Omega parts used but has no proof, is this something to be wary of or could I proceed with confidence.
Out of interest - for those who did it, whats the ballpark all-in figure for buying the parts and a donor watch and having them serviced/assembled?
Times change, but a couple of years ago I think it could be done for £1100-1400 ish.
If I remember right, I think Omega 'wised up' to the home built specials and if the movement number comes back as not being from a SM300 they get funny about servicing it... I can't remember where or when I heard that though....
Mine ran about $2000 for everything including service 3 years ago. Prices have gone up considerably since then. I paid $65 for the dial and they are closer to $300 now. My case was about $850 then but Ofrei is getting over $1500 now. I am stunned at how much Omega has raised their prices on everything the last few years.
He has one listed at the moment at £10k.
The problem with vintage SM 300s is that the lume often ages in a way that makes the watch look horrible. Flashharry’s examples are an exception.
As an aside, I notice that Mike Wood’s listing mentions that the movements are pink gold plated. I have not come across that description before.
Yes, I saw that :)
My lume comment was about original SM300s in general. Not that it matters, readily corrected if there is no particular rarity or need to preserve.
That “pink gold” movement plating mentioned stood out to me. I now recall this coming up before somewhere so I did a bit of Googling. Evan looking at the way some of them corrode would make one think otherwise:
members.iinet.net.au/~fotoplot/rgold/rgold.html
I do appreciate that the plating has absolutely no bearing on the value of any SM300, mil or not - it’s just interesting to me.
Last edited by Si; 12th October 2015 at 09:20.
careful with the above link, my antivirus has reported thus:
"High Risk Website Blocked
Location: members.iinet.net.au/~fotoplot/rgold/rgold.html
Access has been blocked as the threat Mal/HTMLGen-A has been found on this website."