closing tag is in template navbar
timefactors watches



TZ-UK Fundraiser
Page 1 of 2 12 LastLast
Results 1 to 50 of 52

Thread: Inside a Seagull 1901

  1. #1
    Master lysanderxiii's Avatar
    Join Date
    Oct 2006
    Location
    N 28 deg, 31' 18.4902 W80 deg 33' 40.035"
    Posts
    6,020

    Inside a Seagull 1901

    As a follow-up to the ????? 3133 versus Valjoux 7734 thread, I though I'd take a peek inside a Seagull 1901 chronograph, as that is what is currently being used in the PRS-5.

    Technical details: The Seagull 1901 is a 23 jewel, column wheel controlled, chronograph, lever movement operating at 21,600 bph. It has a running second dial at the 9 o'clock position, a 30 minute counter sub-dial at 3 o'clock, and a sweep second counter mounted centrally along with the timekeeping minute and hour hands. The chronograph functions are controlled through two buttons, one (at 2 o'clock) for starting and stopping the chronograph, one (at 4 o'clock) for resetting the second and minute counters. The column wheel prevents the action of the reset while the chronograph is running.

    The 23 jewels are in the following locations:

    Balance staff - 2 bearing, 2 cap, total 4
    Impulse - 1
    Pallet - 2
    Pallet pivot - 2
    Escape wheel pivots - 2
    4th wheel pivots - 2
    3rd wheel pivots - 2
    Center wheel pivots - 2
    Top Chronograph second counter pivot - 1
    Top Chronograph minute counter pivot - 1
    Slider Gear pivots - 2
    Intermediate minute counter wheel pivots - 2

    Here is the front, with the typical Chinese front plate. This does nothing but increases the thickness of the movement and retains the hour wheel (Something the Swiss prefer to do with the dial.)



    And, the back, many have probably seen a better view on the Timefactor's page.



    Some may not know what exactly a column wheel is, or how it works. So, here we have a close-up of the column wheel: (pardon the grease)

    Chronograph engaged


    Chronograph disengaged


    As you can see, the column wheel is castellated, each function is controlled by an arm that has a nose that either fits in between the castellations, or is forced out from them. This keeps you from resetting while the chronograph is running, and such, and gives the column wheel chronograph its smooth action. You may also note that the noses are rather slight, but don’t worry that you will bend one, the action of the buttons does not bring direct force against these small delicate parts.

    At the far left, is the start/stop lever, when the start button is pushed, the pawl moves out ward and rotates the column wheel clockwise one step. This will allow the nose of the slider gear carrier to drop in between two of the castellations and engaging the slider gear and the chrono-second wheel starting the chronograph (first figure). This will also block the hammer from falling (see the hammer nub at about 1 o’clock retaliative to the column wheel. Pushing the start button a second time (as in the second picture) will rotate the column wheel another step and the advancing castellation will force the slider gear carrier nose out disengaging the chronograph and freeing the hammer to fall. The hammer has its own sear triggered by the reset button not seen here.

    Here are all the chronograph function parts. A comparison to the VAL 7734 and Poljot 3133 will reveal this has more parts (nearly 40% fewer on the cam action chronograph). From left to right: bottom row (screws not detailed): start/stop lever, start/stop spring, slider gear carrier spring, slider gear carrier and slider gear, hammer spring, hammer; second row: reset lever spring, reset lever, hammer sear, hammer sear spring, brake lever, intermediate minute wheel carrier and brake lever spring, intermediate minute wheel carrier and wheel, column wheel spring, column wheel; top row: chronograph bridge, minute counter wheel (below) chronograph second wheel.



    Here is just the movement minus the chronograph parts



    And the gear train



    The balance with a nicely formed hairspring



    Close-up of the pallet fork



    The tension spring for the second hand



    Layout of the basic time parts



    The keyless works disassembled



    Close-up of the escape wheel



    A close-up of the balance cock and anti-shock setting





    Anti-shock jewels



    The movement is well made and runs extremely well, this one was time to run, on average, 7 s/d. I runs very consistent. The chronograph functions are relatively light and crisp, unlike the Poljot 3133 and Valjoux 7734.

    The Swiss have, in my opinion, missed a boat by ceasing the production of handwinding two resister chronographs and focusing exclusively on automatics. Most of the chronograph market (90% or more) use the 7750 or el Premiro, the 7750 (or a variant) for the low to middle price range, the el Premiro for the higher price range.

    The workmanship on these movements is better than the run-of-the-mill Chinese ST16 and DG28, The gears are slightly thicker and the teeth, especially the fine teeth of the chronograph second wheel, are clean and well formed. The adjustments of the chronograph functions (slider gear mesh on both sides, and intermediate minute wheel engagement) was adequate, but the second hand jumped slightly on engagement. Not all that bad, though.

    I like this movement, I hope to see Seagull come out with a date (at six) or an actual hour counter version in the future. Then someone can do a Benrus Skychief homage. Also, it might be possible to do true "fly-back" version, this would be nice.

    The finish is not the movement’s strong point, this is my only gripe, and a relatively minor one. The Geneva stripes are rather coarse and uneven. These have been made with a fly-cutter, not grinding compound and a disk and the cross-feed was to high. The screws are chemically blued and almost baby blue in color, not the preferable blue-black of a good charcoal blue. There was to my surprise pearlage on the exposed portion of the mainplate around the balance, but it was so light I didn’t notice it until examining the mailplate under a loupe.




  2. #2
    Master
    Join Date
    Sep 2005
    Location
    Malta
    Posts
    1,111

    Re: Inside a Seagull 1901

    Another one destined for the Classic Posts it seems :wink:

    Great job Lysander!

  3. #3
    Grand Master Jonmurgie's Avatar
    Join Date
    Feb 2007
    Location
    Cheltenham
    Posts
    11,322

    Re: Inside a Seagull 1901

    WOW... thanks for taking the time to make this post :D

  4. #4
    Master doug darter's Avatar
    Join Date
    Dec 2003
    Location
    Shropshire, UK, by the grace of God. dougdarter@aol.com
    Posts
    8,718

    Re: Inside a Seagull 1901

    Thanks once again. An excellent article, and very, very interesting. It will please the PRS 5 owner here. Keep them coming :D

  5. #5

    Re: Inside a Seagull 1901

    What a wonderful post. This must go in the classic post forum.

  6. #6
    Master Jim:'s Avatar
    Join Date
    Sep 2005
    Location
    Aotearoa
    Posts
    3,227

    Re: Inside a Seagull 1901

    Well done indeed.

    Thanks for posting.

    Jim :)

  7. #7
    Master markosgr28's Avatar
    Join Date
    Mar 2008
    Location
    Heraklion, Crete, Greece
    Posts
    3,578

    Re: Inside a Seagull 1901

    Wow, I love this stuff! Thanks for posting.

    Best Regards,
    Markos

  8. #8
    Grand Master Griswold's Avatar
    Join Date
    Feb 2005
    Location
    Yorkshire, England
    Posts
    20,742

    Re: Inside a Seagull 1901

    Another excellent and enjoyable article Lysander. Thanks for taking the time to do it. :)
    Best Regards - Peter

    I'd hate to be with you when you're on your own.

  9. #9
    Administrator swanbourne's Avatar
    Join Date
    Oct 2002
    Location
    Sheffield, England
    Posts
    47,531

    Re: Inside a Seagull 1901

    Superb!

    Eddie
    Whole chunks of my life come under the heading "it seemed like a good idea at the time".

  10. #10
    Thomas Reid
    Join Date
    Apr 2004
    Location
    Oxford, UK
    Posts
    20,326

    Re: Inside a Seagull 1901

    Another great post. You're certainly on a roll, lysanderxiii!

    Best wishes,
    Bob

  11. #11
    Grand Master mr1973's Avatar
    Join Date
    Jun 2006
    Location
    Salzburg, Austria
    Posts
    16,491

    Re: Inside a Seagull 1901

    Wonderful review Lysander! Thank you very much for that.

    Incredible movement (given the price) imho!
    I'm not as think as you drunk I am.

  12. #12

    Re: Inside a Seagull 1901

    Excellent read. Thanks for the info.

  13. #13
    Master
    Join Date
    Jan 2009
    Location
    Essex / Herts
    Posts
    1,664

    Re: Inside a Seagull 1901

    Fantastic explanation and great pictures. Thanks for that !
    Cheers, Gerry :thumbright:

  14. #14
    Craftsman ChronoCop's Avatar
    Join Date
    Oct 2002
    Location
    E.U.-sur-mer
    Posts
    907

    Re: Inside a Seagull 1901

    Wonderful, thanks Lysander! Might help buying decisions at Eddie's as well.
    Cheers
    Brane

  15. #15
    Grand Master Daddelvirks's Avatar
    Join Date
    Jul 2007
    Location
    Leiden- Netherlands
    Posts
    41,023
    Blog Entries
    1

    Re: Inside a Seagull 1901

    Thanks for that!

    That was very interesting, and lovely pics as well.
    It seems that with a little more care this movement can be on par with it's Swiss brothers :) .

    Cheers,

    Daddel.
    Got a new watch, divers watch it is, had to drown the bastard to get it!

  16. #16
    Master
    Join Date
    Apr 2007
    Location
    Dublin Ireland / Indonesian Archipelago
    Posts
    2,431

    Re: Inside a Seagull 1901

    Fantastic post, great learning material and pictures. Thanks a million!

  17. #17
    Master studs's Avatar
    Join Date
    Nov 2008
    Location
    NE Scotland
    Posts
    1,061

    Re: Inside a Seagull 1901

    Excellent photographs and descriptions... another very good post, thank you for sharing.

  18. #18

    Re: Inside a Seagull 1901

    Excellent, many thanks

  19. #19
    Grand Master WORKSIMON's Avatar
    Join Date
    Feb 2008
    Location
    Dreich Scotland
    Posts
    10,947

    Re: Inside a Seagull 1901

    Brilliant post, brilliant pictures, just brilliant, thanks for sharing.

    Cheers

    Simon
    Cheers

    Simon



    Ralph Waldo Emerson: We ask for long life, but 'tis deep life, or noble moments that signify. Let the measure of time be spiritual, not mechanical.

  20. #20
    Master
    Join Date
    Apr 2007
    Location
    Massachusetts
    Posts
    5,217

    Re: Inside a Seagull 1901

    Worth a bump to the top for those who haven't seen it.

  21. #21
    Master
    Join Date
    May 2005
    Location
    SF Bay Area
    Posts
    1,740

    Re: Inside a Seagull 1901

    Nice review - as usual.

    HEY EDDIE. Maybe with the financial melt down occurring in China also, you might be able to get a deal on more of these for the PRS-5 ??? Get yourself a deal, and try to keep their factory workers busy, before they have to let them go back to the farms (seriously - all the people that were brought in from the country to work in the factories are now being told to go back to the farm for lack of work, but that means people who were just becoming skilled are being lost). Oh, and if you do get a deal on them, think about passing the savings onto us! :twisted:

  22. #22
    Master
    Join Date
    Mar 2006
    Location
    b.1789 Tardis-esque to the Present...
    Posts
    6,377

    Re: Inside a Seagull 1901

    Very informative post and helpful. Many thanks. Superb!

    Best wishes,
    AP.

  23. #23
    Master Sharky's Avatar
    Join Date
    Mar 2007
    Location
    Bristol
    Posts
    8,186

    Re: Inside a Seagull 1901

    Great post, thanks!!

    Mark

  24. #24
    Master Rinaldo1711's Avatar
    Join Date
    Mar 2007
    Location
    Suffolk
    Posts
    8,120

    Re: Inside a Seagull 1901

    Most enjoyable and very informative - thanks!

  25. #25

    Re: Inside a Seagull 1901

    outstanding!! Thanks

  26. #26

    Re: Inside a Seagull 1901

    Thanks for the break down, I have one of these that runs +3 seconds a day every day, and i am very pleased with it. I would hapily have more with this movement. I feel more and more every day about totaly turning my back on swatch and ETA, I feell sure that i can get every complication that i would like to use from other sources, with the exception of one i am yet to see a good GMT funtion from china, correct me if i am wrong here. Seagull has made a good working example of the 2892 but not a 2893!

  27. #27
    Master
    Join Date
    Jun 2005
    Location
    Stoke-on-Trent
    Posts
    1,823

    Re: Inside a Seagull 1901

    Great post.
    Many thanks

  28. #28

    Re: Inside a Seagull 1901

    very useful, thank you.

  29. #29
    Journeyman
    Join Date
    Jun 2009
    Location
    New Zealand
    Posts
    187

    Re: Inside a Seagull 1901

    A newcomer to this forum, I just ran across this thread. Fascinating, and really educational for me. Thanks!

  30. #30
    Journeyman
    Join Date
    Jul 2009
    Location
    leicester
    Posts
    216

    Re: Inside a Seagull 1901

    Lovely photography, we need another post now to learn how to get such great close ups

  31. #31

    Re: Inside a Seagull 1901

    Excellent many Thanks

  32. #32

    Re: Inside a Seagull 1901

    superb pics.. attention to detail in the highest order!

  33. #33

    Re: Inside a Seagull 1901

    fantastic photos thanks :

  34. #34
    Master Paul J's Avatar
    Join Date
    Oct 2009
    Location
    Pembrokeshire, South west Wales
    Posts
    1,025

    Re: Inside a Seagull 1901

    I got so carried away with the Valjoux/Poljot thread I had to read this too - Thanks for all your work and an interesting insight!

  35. #35
    Craftsman loqv75's Avatar
    Join Date
    Oct 2011
    Location
    Brussels & B'ham
    Posts
    790

    Re: Inside a Seagull 1901

    very instructive thread, thanks

  36. #36

    Re: Inside a Seagull 1901

    Amazing details :shock:

  37. #37

    Re: Inside a Seagull 1901

    Great post, very educational, thank you.

  38. #38
    Craftsman
    Join Date
    Dec 2010
    Location
    Scotland
    Posts
    531

    Re: Inside a Seagull 1901

    Another excellent post :thumbright:

  39. #39
    Journeyman
    Join Date
    Jul 2011
    Location
    Bucharest, Romania
    Posts
    112

    Re: Inside a Seagull 1901

    Incredible photos, thank you very much!

  40. #40
    Journeyman
    Join Date
    Mar 2012
    Location
    Donegal
    Posts
    191

    Re: Inside a Seagull 1901

    Thank you, great detail in the photos.

  41. #41
    Journeyman
    Join Date
    Apr 2013
    Location
    Netherlands
    Posts
    53
    Even after all these years....great post, very usefull!

    - Men

  42. #42
    Certainly a great post and worthy of the new bump. I recently have tried my first Seagull 1901 in a Kemmner Bund and I am most impressed with it.

  43. #43
    Banned
    Join Date
    May 2009
    Location
    London
    Posts
    6,614
    Blog Entries
    2
    Great post. Thanks!!

  44. #44
    Journeyman
    Join Date
    Jun 2013
    Location
    SF Bay Area, CA USA
    Posts
    60
    Much more impressed with this movement after this great post. Appreciate your effort!

    Quote Originally Posted by lysanderxiii View Post
    As a follow-up to the ????? 3133 versus Valjoux 7734 thread, I though I'd take a peek inside a Seagull 1901 chronograph, as that is what is currently being used in the PRS-5.

    Technical details: The Seagull 1901 is a 23 jewel, column wheel controlled, chronograph, lever movement operating at 21,600 bph. It has a running second dial at the 9 o'clock position, a 30 minute counter sub-dial at 3 o'clock, and a sweep second counter mounted centrally along with the timekeeping minute and hour hands. The chronograph functions are controlled through two buttons, one (at 2 o'clock) for starting and stopping the chronograph, one (at 4 o'clock) for resetting the second and minute counters. The column wheel prevents the action of the reset while the chronograph is running.

    The 23 jewels are in the following locations:

    Balance staff - 2 bearing, 2 cap, total 4
    Impulse - 1
    Pallet - 2
    Pallet pivot - 2
    Escape wheel pivots - 2
    4th wheel pivots - 2
    3rd wheel pivots - 2
    Center wheel pivots - 2
    Top Chronograph second counter pivot - 1
    Top Chronograph minute counter pivot - 1
    Slider Gear pivots - 2
    Intermediate minute counter wheel pivots - 2

    Here is the front, with the typical Chinese front plate. This does nothing but increases the thickness of the movement and retains the hour wheel (Something the Swiss prefer to do with the dial.)



    And, the back, many have probably seen a better view on the Timefactor's page.



    Some may not know what exactly a column wheel is, or how it works. So, here we have a close-up of the column wheel: (pardon the grease)

    Chronograph engaged


    Chronograph disengaged


    As you can see, the column wheel is castellated, each function is controlled by an arm that has a nose that either fits in between the castellations, or is forced out from them. This keeps you from resetting while the chronograph is running, and such, and gives the column wheel chronograph its smooth action. You may also note that the noses are rather slight, but don’t worry that you will bend one, the action of the buttons does not bring direct force against these small delicate parts.

    At the far left, is the start/stop lever, when the start button is pushed, the pawl moves out ward and rotates the column wheel clockwise one step. This will allow the nose of the slider gear carrier to drop in between two of the castellations and engaging the slider gear and the chrono-second wheel starting the chronograph (first figure). This will also block the hammer from falling (see the hammer nub at about 1 o’clock retaliative to the column wheel. Pushing the start button a second time (as in the second picture) will rotate the column wheel another step and the advancing castellation will force the slider gear carrier nose out disengaging the chronograph and freeing the hammer to fall. The hammer has its own sear triggered by the reset button not seen here.

    Here are all the chronograph function parts. A comparison to the VAL 7734 and Poljot 3133 will reveal this has more parts (nearly 40% fewer on the cam action chronograph). From left to right: bottom row (screws not detailed): start/stop lever, start/stop spring, slider gear carrier spring, slider gear carrier and slider gear, hammer spring, hammer; second row: reset lever spring, reset lever, hammer sear, hammer sear spring, brake lever, intermediate minute wheel carrier and brake lever spring, intermediate minute wheel carrier and wheel, column wheel spring, column wheel; top row: chronograph bridge, minute counter wheel (below) chronograph second wheel.



    Here is just the movement minus the chronograph parts



    And the gear train



    The balance with a nicely formed hairspring



    Close-up of the pallet fork



    The tension spring for the second hand



    Layout of the basic time parts



    The keyless works disassembled



    Close-up of the escape wheel



    A close-up of the balance cock and anti-shock setting





    Anti-shock jewels



    The movement is well made and runs extremely well, this one was time to run, on average, 7 s/d. I runs very consistent. The chronograph functions are relatively light and crisp, unlike the Poljot 3133 and Valjoux 7734.

    The Swiss have, in my opinion, missed a boat by ceasing the production of handwinding two resister chronographs and focusing exclusively on automatics. Most of the chronograph market (90% or more) use the 7750 or el Premiro, the 7750 (or a variant) for the low to middle price range, the el Premiro for the higher price range.

    The workmanship on these movements is better than the run-of-the-mill Chinese ST16 and DG28, The gears are slightly thicker and the teeth, especially the fine teeth of the chronograph second wheel, are clean and well formed. The adjustments of the chronograph functions (slider gear mesh on both sides, and intermediate minute wheel engagement) was adequate, but the second hand jumped slightly on engagement. Not all that bad, though.

    I like this movement, I hope to see Seagull come out with a date (at six) or an actual hour counter version in the future. Then someone can do a Benrus Skychief homage. Also, it might be possible to do true "fly-back" version, this would be nice.

    The finish is not the movement’s strong point, this is my only gripe, and a relatively minor one. The Geneva stripes are rather coarse and uneven. These have been made with a fly-cutter, not grinding compound and a disk and the cross-feed was to high. The screws are chemically blued and almost baby blue in color, not the preferable blue-black of a good charcoal blue. There was to my surprise pearlage on the exposed portion of the mainplate around the balance, but it was so light I didn’t notice it until examining the mailplate under a loupe.




  45. #45
    Love your HD close distance shots! Thanks for sharing. I have the Seagull ST19 movement, which (I'm not a movement expert) is quite similar I believe.
    It really adore to see the column wheel regulate all the action.

  46. #46
    Apprentice
    Join Date
    Feb 2016
    Location
    China
    Posts
    165

    Red face Inside a Seagull 1901

    that's a grate post.

  47. #47
    Craftsman
    Join Date
    Dec 2015
    Location
    Devon, UK
    Posts
    360
    Great post, love the pictures

  48. #48
    Journeyman
    Join Date
    Jan 2016
    Location
    Lichfield
    Posts
    94
    Good to know these movements can be serviced without too much issue.

    Sent from my SM-N960F using Tapatalk

  49. #49
    appreciate the photos


    Sent from my iPad using TZ-UK mobile app

  50. #50
    Quote Originally Posted by tixntox View Post
    Inside a seagull 2022...
    And straight into the blocklist you go. Aside from being completely off-topic and spoiling a "classic thread" no less, a gore warning might have been nice.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Do Not Sell My Personal Information