As long as it screws in and out as it should, and drops easy into its three positions, I wouldn't worry about it.
A friend of mine bought a brand new Seamaster from WOS online. When it arrived he noticed the crown wasn’t screwed in.
He’s worried if any damage could have occurred or if any dust could have got in etc.
He asked me if he should get a replacement watch now rather then find out there’s issues down the line.
I’m not sure there’s anything to worry about. What do you guys think?
Sent from my iPhone using Tapatalk
As long as it screws in and out as it should, and drops easy into its three positions, I wouldn't worry about it.
Interested to see the replies to this.
I would have assumed it's a non issue but happy to be corrected.
Sent from my M2101K7BNY using Tapatalk
There are still gasket seals preventing ingress with the crown out.
As said above, as long as the crown screws in and out OK (about 3 turns to screw down) without signs of threading then it should be fine.
Admittedly, it seems odd that it would be unscrewed.
Unless they’ve radically altered the crown design from the 2010 versions (which I doubt) there won't be a problem. The seal consists of an O ring inside the crown which engages on the outer surface of the pendant tube. As tge crown screws down the seal compresses slightly against a shoulder, thus giving a very positive seal. With the crown crown pulled out the seal is still in contact with the pendant tube and still sealing the watch although I doubt it would stand significant pressure.
Really is nothing to worry about!
There’s nothing to worry about, it’s a sign that someone actually checked watch before shipping.
did it still have all the factory stickers on? (Bracelet, face, back etc)?
“ Ford... you're turning into a penguin. Stop it.” HHGTTG
It’ll be fine; I’ve watches with 100m WR with only a push down crown. As long as the crown tube remains threaded okay (and there’s little possibility of any problem in transit in its box), it’ll be fine. Your friend needs to enjoy his purchase!
Often they are unscrewed when placed in the window so they show the ergonomically optimal 'ten past ten' time. So it is probably a display model. Nothing to worry about.
The main reason for doing this used to be with quartz watches so as to stop the batteries running down - depending upon when they were manufactured, you can quite quickly end up with a window display with multiple watches with dead batteries.
Though I wouldn't be surprised if someone carried on, not knowing why they were doing it and applied it to mechanical watches as well.
Sent from my JSN-L21 using Tapatalk