I can't ID that from the top using my books or the advanced search on ranfft. If you can get the dial and hands off and take a picture of the dial side I should be able to ID it.
I'd like help to identify the movement below. It has no shock protection (I think), has sub-seconds and is about 24mm diameter. I can't see any maker's name and there is nothing on the dial to indicate a brand. The case has fixed bars.
I can't ID that from the top using my books or the advanced search on ranfft. If you can get the dial and hands off and take a picture of the dial side I should be able to ID it.
The regulars on the WUS vintage forum are excellent at movement ID
Have a careful look under the balance.
You'll sometimes see a mark there.
Cheers,
Neil.
Thanks all for your comments and help. I have not been able to find any other marks and I am not able to get the dial off so it's still unidentified.
Is it a centre seconds or subsidiary seconds watch?
It looks a bit like a IWC caliber 89. (IWC WWW)
I normally have a bit of luck using the ranfft tool but I've failed on this one: http://www.ranfft.de/cgi-bin/bidfun-2uswk.cgi?1&ranfft
Very pleased my advice proved not to be a heap of #$*&