Quote Originally Posted by tokdok View Post
Ollie Don't worry too much about losing the screw, I have plenty..
If you loosen either screw slightly & take out the other, slip the cell under the contact clamp (pointy end/positive of the cell down) & then you
will need to press the loose bridge/contact arm over with a toothpick or similar to align the holes, & then insert the screw (you will need tweezers to place it in position before screwing down) Hopefully it will then start ticking.. any problem let me know..
john
What could possibly go wrong?

Some plastic sheeting might be a good idea Rev. Speaking from experience...