closing tag is in template navbar
timefactors watches



TZ-UK Fundraiser
Results 1 to 2 of 2

Thread: Help need with Seiko 6105-8100/8119 case tube dimensions...

  1. #1

    Help need with Seiko 6105-8100/8119 case tube dimensions...

    Well i am trying to research something and i do not see this info anywhere...i know the case tubes are different from a 6105-8000/8009 and the 6105-8100/8119.....and i see no one is remaking them like the 6309 case tubes...might someone here get me a measurement and some pics of what it should be?...i think from memory the only way the 6105-81xx series cases crown lock is that small ball...no threads on the tube like the 6309/7548's....my thinking is this...could a 6309 casetube have the threads removed and be used or does it need to have a longer overall tube made the same way as the 6309 with no threading?...or maybe u can get a section of stainless tubing the correct diameter and drill out your damaged or missing one and press the new one in or solder it in...my mind is always working and this seems to be a problem i see no one has a thread on here how to fix...thanks in advance God Bless,John
    i would like internal and exterior lengths and widths please....
    pics would also be great along with it...

    well i measured one of these 6309 case tubes everyone has seen...
    9mm long
    4mm at the wider area that fits into the case and the 5 mm is the tube section
    1.019 mm wide on the lower section and the top is 1.002 and has a very slight chamfer...

    i would love to see how close the 6105-8110/8119 is...
    Last edited by jringo8769; 25th December 2018 at 03:12.

  2. #2
    here is some pics of the crown tube from pics online...
    there is no threads...just a straight tube...
    here is what i found...thank u scwf and internet



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Do Not Sell My Personal Information