Quality NATOs?

[wadsy]

I'm looking for a good quailty 'bond' nato in 22mm,

I previously had a 'vintage bond' from WatchGecko but found the material a bit too thin/flimsy.

I've ordered an RAF grey/black 'bond' one from Eddie that, at 1.4mm should be good, but would like a coloured one as well, like in the pic below and 'RAF' style if at all possible for single thickness under the watch.

Any suggestions please?

Cheers

[WarrenVrs]

Crown and buckle. You'd have to make it raf style yourself

Sent from my ONEPLUS A6003 using Tapatalk

[magirus]

You could buy a Jetson from Barton and remove the extra bit, I have a different colour and have done this, takes seconds with sharp scissors and a flame to seal the cut. https://www.bartonwatchbands.com/col...lon-nato-strap For different colours look at Haveston http://haveston.com/index.html and Blue Shark https://www.blusharkstraps.com . I have a couple from Haveston and their sliding keeper is a real improvement.

[wadsy]

Thanks chaps

[Joe O'Brien]

I also endorse Haveston. The fact that they're longer at the 12 end, along with the floating keeper, means the buckle sits under your wrist. Their M1936 is a single layer and might go quite nicely with your Pelagos.

Can also recommend Crown & Buckle and BluShark for high-quality seatbelt-style.

[wadsy]

In true Bond style, a 20mm 'bond' on the Pelagos LHD (22mm) .....

This is one of Eddie's and I much prefer the more 'olive/khaki?' rather than more green stripes. Unfortunately Eddie doesn't do one in 22mm....anyone know of one elsewhere?




Cheers

[Steelgecko]

Crown And Buckle seconded. I can also recommend Geckota from watchgecko.