Some excellent efforts there on the accessories front...
Here’s some of mine.... bound to have forgotten some
Ducati...
Roland sands fuel cap
Roland sands frame plugs
Roland sands oil filler plug
Roland sands exhaust trim
Roland sands front sprocket guard
Different handlebars
Triumph bar end mirrors
Translogic quickshifter
Ducati tail bag
Zard exhaust and decat.. (due next week)
Speedmaster
Black engine cases
Bobber handlebars
Machined master cylinder cap
TEC adjustable levers
Shark silencers (pee shooter)
Light weight wheels with bronze spokes (tubeless)
Black headers
Brown rider and passenger seats
Heated grips
New fuel tank (different colour)
Passenger seat delete kit
Shorty front mudgaurd
Small led indicators (front)
Multi function rear lights
Tail tidy
Triumph leather panniers
Different gearing (front and rear sprockets)
Knee pads
Aluminium engine bolt kit (black)
Triumph engine emblems upgrade
Bobber TFC
TEC decat
Triumph Forward Controls (all fasteners changed to titanium)
Triumph headlight bezel
Triumph master cylinder (CNC) due next week
Custom seat
Fuel booster plug
Aluminium engine bolt kit (gold)
Different gearing (front and rear sprockets)
Triumph throttle body emblems upgrade
Motone radiator guard
Last edited by Enoch; 17th June 2020 at 12:47.
I think this is where I am at present:
Street Twin
Fox adjustable RSU
Heated grips
Luggage rack
Centre stand
Drilled chain guard
Engine guards
Knee pads
Tank pad
Dresser bars
Flyscreen + kit
CNC front reservoir
Bar end mirrors
Headlight grill
Street Triple
Exhaust end-can
Heated grips
Tail tidy
Engine guards
Passenger grab rails
Bar end mirrors
Bobbins
Sump guard
Flyscreen
Brake and clutch levers
R9T
Heated grips
Machined oil filler cap
Custom black/orange Scrambler seat
Flyscreen
Oil cooler guard
Engine/head covers
Bar end mirrors
Front fender extender
Rear hugger
Tail tidy
Fork sliders
Swing arm license plate holder
Seat pod
Headlight grill
Fork covers
Rear rack
Slip-on exhaust
Brake and clutch levers
Sidestand extender
Tank pad set
A combined cost of thousands of pounds, I imagine (although I may have missed some, there have been so many). i did start keeping a slogger but stopped when it all became too depressing.
My RR was year old when I got it & the first owner had added some pretty expensive options
HP Levers
HP Rearsets
Akrapovič end can + carbon hanger.
Rad grille
To that I added
Lightech crash bungs
R&G Front & Rear spindles
HP / Gilles chain adjusters
GB racing clutch & engine casings
Gripper pads on the tank sides
Tail tidy + ever so slightly smaller plate
R&G end can protector
Better headlight bulbs
Lithium battery
Pillion pack (seat / footpegs) - never used.
Roadlok - disc locking system
That little lot was another reason not to "upgrade" to the new model.
Andy
Wanted - Damasko DC57
These are all the options and extras I’ve added to my 1977 CB750K7:
Last edited by hhhh; 18th June 2020 at 15:18.
Thats more like it !....I might replace the grips on the XR600
Be aware though that in theory the MOT is meant to test if your exhaust is louder than standard.
https://www.gov.uk/guidance/mot-insp...e%20condition.
"The exhaust system and silencer should be in such condition, or of such a type, that the noise emitted from the motorcycle is not clearly unreasonably above the level expected from a similar motorcycle with a standard silencer in average condition"
I didn't have an issue with my full Akra Ti de-cat system on my R9T when it was tested by my local mechanic who does various bits of work for me.
Just something to be aware of.
Started out with nothing. Still have most of it left.
Not a fan of the purple anodised bolt kits then ?
All my road bikes have been standard apart from odd stealth fork spring kit and refurbed shock. Not so restrained on my track bike though. This 21 year old firestorm is one of the current crop and apart from consumables is original, bar one item
Yeah that pretty much sums them up I think Dave, but I always thought the 660 was the real hooning tool. The 625 had different carbing and jetting to the 640 one, dunno about a balancer shaft, it was a big single thumper. I remember giving a fair few sports type bikes a shock on our local silly road, the A49 going south from Warrington, and also around town where the roundabouts came up thick n fast. It was really frightening how powerful the brakes were on it, and with it being so light and flickable it ran rings round a lot of faster bikes. Heres a couple of pics.
Stuart
Yes.
I have ordered on my new bike:
V&H pipes: I really dislike the look of the stock ones. My Striple has had standard since day one, but I knew from the outset if I bought a Speed Twin the standard pipes would have to go. The extra burble/pops is a bonus.
The fancy brake fluid reservoir thing: The stock one is a really naff plastic thing out of keeping with the rest of the bike, it annoyed me.
The headlight bezel: For some reason I really like this, every time I have seen a bike with it on I have noticed it.
The air intake covers: I really prefer black so had to be done.
I doubt I will change it much after I get it much but we'll see.
ETA: Not a criticism of those that order loads of extras, just not my thing!
Last edited by SimonH; 18th June 2020 at 23:47.
You could be right but I recall thinking it strange that the real mad one had the lower number (the engines were all the same size though, 625cc IIRC).
I bought a 640 SM after having done a track day at Caldwell on my WR400 Yam in Supemoto trim. Unfortunately I didn’t get on with it and sold it. I really should have given it more time!
Track day at Mallory Park on Sunday - really looking forward to that - It will be the first since July last year.
Just checked the forecast - could be wet in the morning.
Gratuitous shot from a previous visit
Andy
Wanted - Damasko DC57
Gixxer looks to be a great trackday weapon.
Colour coded Hel lines too! *impressed*
Have a great day
It's a nice overcast day so I thought I'd treat my SDR to its first snow foam:
I'm not that impressed with the foam (Autoglym Polar Blast) and may stick to SDoc100 in future.
Ha... well that didn’t last long... the set on the right is to tall, so I’ve taken the 4 drawer unit and blue top unit from the right, and swapped them for rage top red unit from the left, so now I have 3 sets of cabinets per side, and I can see what’s in the top unit on both sets....😎
Yes..... but I don’t want to over egg the job🤓🤓🤪
Just a reminder. A fantastic photo that should make everyone look twice...
'Against stupidity, the gods themselves struggle in vain' - Schiller.
Yes, it does. It ruins their credibility and with it, the message.
Bikes can be hard to see but most of the time it's down to people not looking at all, not because they looked and didn't see.
"Think Bike poster was edited ‘to get message across’ | Visordown" https://www.visordown.com/news/gener...s%E2%80%99?amp
Interestingly, the article suggests that they removed mist and that they added the junction to change it to a drivers' eye view (the infrerence being that a car is about to pull out).
Nowhere does that article suggest that the biker was made less visible.
I think the power of that photo is undiminished by photoshopping.
The problem is not to do with people who do not look, they are very rare.
The problem is to do with people who look, but do so with the preconception that they are looking for cars. When they look, their brain ignores a bike because they are not looking for it.
This image conveys that very well
Dave
Surely the whole point is that the biker is there, but difficult to see. The fact it is photoshopped has no relevance. It could be a painting, the message surely is that drivers should be more careful when pulling out of junctions and bikers (I am one) should make themselves as visible as possible.
Started out with nothing. Still have most of it left.
I attended a Bike Safe course run by the local Police ( motorcyclists) last year. They raised the concept that people look for what they expect. Eg a car driver looks for cars, vans buses. A motorcyclist looks for bikes cars etc.
This has a factual background in that they monitored the eye movements of different drivers at the same junction with cars bikes cyclists etc.
This led on to the concept of “ how do we then get seen” as its more than driving with lights on and wearing hi vis as the driver “ is not looking for you”
Also a biker presents a small profile head on and often even if they see you the drivers dont always anticipate Your closing speed correctly.
They discussed moving to the crown of the road, dipping the front brake as this has the effect of flashing the lights eg increasing visibility in a dynamic way. They also talked about moving within the lane to create a side to side image rather than a Small profile bearing down quickly.
In summary they repeated , Its “ expected “ the driver of another vehicle Is likely to do the “ unexpected “
For those of us who ride regularly in urban environments, this is all too evident, and whilst hi-vis may be a help in some circumstances it's of limited use IMO. The ONLY answer is to ride defensively - out on the twisties life is a little different, but here in the smoke if you don't do it you won't last long.
I know I shouldn't get animated at things I see on the Internet, but i do get annoyed at all the videos on YouTube of riders getting really upset where car drivers haven't seen them and have cut them up, when in fact the rider has been nipping through gaps in the traffic, riding far faster then the surrounding vehicles and has typically approached the car in the driver's blind spot which may well have been clear 2 seconds earlier; basically not riding defensively.
So it becomes the car driver's fault when in truth the biker has snuck up on them at pretty high speed. But of course the biker is apparently entitled to behave like that simply because they have a bike and, more than likely, a race can.
And of course, 99% of the comments on the video are reinforcing that position.
There are a couple of famous biking YouTubers that, when you watch them, seem to deliberately ride to catch the drivers out simply to get good footage to stream, and of course their fan base is then baying for the driver's blood.
Rant over, back to work...
I have been a victim of "SMIDSY" although in my case the car driver simply failed to look, not to see. There is some science behind many of such "looked-but-failed-to-see (LBFTS)" incidents. This is a short but informative piece (there are others that support the phenomenon of inattentional blindness): https://www.sciencedaily.com/release...0105082243.htm
Last edited by Stanford; 22nd June 2020 at 09:48.