closing tag is in template navbar
timefactors watches



TZ-UK Fundraiser
Page 3 of 4 FirstFirst 1234 LastLast
Results 101 to 150 of 168

Thread: A complete watch.

  1. #101
    Craftsman
    Join Date
    Mar 2008
    Location
    London, Birmingham
    Posts
    575

    Re: A complete watch.

    Thanks. *doffs cap* :)

    Looks like I have a broken set lever on the smiths, so I'll have to find another candidate.

  2. #102
    Thomas Reid
    Join Date
    Apr 2004
    Location
    Oxford, UK
    Posts
    20,326

    Re: A complete watch.

    It looks like this AS1539/Wittnauer C11WS2, which I just overhauled, will work. And, it is the right size, etc. So, I can turn to the dial now.



    Best wishes,
    Bob
    Last edited by rfrazier; 9th November 2014 at 03:14.

  3. #103
    Thomas Reid
    Join Date
    Apr 2004
    Location
    Oxford, UK
    Posts
    20,326

    Re: A complete watch.

    For the moment, I'm back to the O613. The other movements have gone to Hell in a handbag, although I'm hoping to resurrect one. Also, I've not been able to do much more than described here because I've been ill, and have had to save my energy for work.

    In any case, here is how I make the physical dial. The tricky bit is to get the dial feet in the correct location. I've not measured how accurate one has to be, but it looks on the order of .05-.1mm.

    The first thing to do is make a template of the dial, with the center hold and dial feet in the correct position. So, I start by taking a picture of the movement. It is important that the movement be on the same plane as the lens. Also, that there be as little perspective distortion as possible. So, I use the copy stand, and get the camera as far away from the movement as possible.


    After the picture is taken, it needs to be scaled. The best way I've found is to use an altered circle cutter. Standard calipers don't work as well as their pointy bits are at an angle. I put the pointy ends of this in the holes for the dial feet, and measure the distance between them.


    After the picture is scaled and printed, I put it on a bit of scrape metal (an unusable printing cliche, in this case).


    Using a scribe, I mark the scrapmetal by passing the tip of the scribe through the appropriate places in the picture of the movement. Finally, using a fine drill bit, and an Archimedean hand drill, I drill holes in the template.


    It sounds a lot of work, but the advantage is that once the template is good to go, it becomes easy to make additional dials for that calibre. (Either for different tokens of the movement -- or like ones -- or if I want to make another dial for this token.)

    Now that I have the template for the center hole and dial feet, I superglue a bit of brass to a faced bit of aluminium which is in a three jaw chuck, and drill the center hole, and cut off the excess brass (given the diameter of the dial I want).


    The brass (dial) is removed from the aluminium with a bit of heat. Then the bottom of the dial is adhered to the template, with the center hole lined up with the center hole on the template. The template is turned over, and the dial feet locations are marked through the hole in the template using a scribe.

    The dial feet now have to be soldered (brazed) on to the dial. I take a bit of copper wire and made sure that it is the right diameter (.6mm for this, so I had to reduce it from .8). Then some silver solder paste is put where I marked the location for the dial feet, and the wire is clamped into place.


    Apply some heat, and we have dial feet.


    The dial is cooled, the feet cut off at about the right location (to be filed down a bit later), it is cleaned with soap, water and a toothbrush, then it is dried in sawdust.



    Finally, I check the dial on the movement, and if it looks okay, file a slight "v" at 3.


    Best wishes,
    Bob
    Last edited by rfrazier; 9th November 2014 at 03:15.

  4. #104
    Craftsman
    Join Date
    May 2006
    Location
    Stockholm, Sweden
    Posts
    289

    Re: A complete watch.

    This is one of the most impressive posts I've ever read! Job well done!

  5. #105
    Master westy's Avatar
    Join Date
    Jan 2006
    Location
    Stafford
    Posts
    3,194

    Re: A complete watch.

    I'm only posting to say I'm still readng this thread with interest and 'Keep going Bob'.
    Top stuff, thanks.

  6. #106
    Journeyman
    Join Date
    Apr 2006
    Location
    earth
    Posts
    193

    Re: A complete watch.

    God yes, its brilliant. I love the pictures.

  7. #107
    Grand Master
    Join Date
    Feb 2003
    Location
    Camberley
    Posts
    11,144

    Re: A complete watch.

    Quote Originally Posted by westy
    I'm only posting to say I'm still readng this thread with interest and 'Keep going Bob'.
    Top stuff, thanks.
    +1
    /vince ..

  8. #108
    Thomas Reid
    Join Date
    Apr 2004
    Location
    Oxford, UK
    Posts
    20,326

    Re: A complete watch.

    I took a bit of time off from working on watches (for various reasons), but I'm about ready to start up again.

    PS Indeed, I've just got done cleaning my work space, filling the oil cups, and tidying up my screwdrivers and tweezers. All set to go now.



    Best wishes,
    Bob
    Last edited by rfrazier; 9th November 2014 at 03:15.

  9. #109
    Master
    Join Date
    Jul 2006
    Location
    London/Surrey, UK
    Posts
    3,158

    Re: A complete watch.

    I can't believe I've only just found this thread - it's superb! I shall now follow it with interest.

    Many thanks, Bob!

    Cheers,

    Guy :)

  10. #110
    Grand Master Chris_in_the_UK's Avatar
    Join Date
    Nov 2004
    Location
    Norf Yorks
    Posts
    43,603

    Re: A complete watch.

    Do not know how you find the time Bob - but I am glad you do.... :D
    When you look long into an abyss, the abyss looks long into you.........

  11. #111
    Apprentice
    Join Date
    Jan 2008
    Location
    Sheffield, UK
    Posts
    29

    Re: A complete watch.

    Bob,

    This is a fascinating thread, a real inspiration to people like myself who wonder how hard it is, and whether it would be possible to do something similar. Thanks for all the hard work, keep posting!


    Jeff.

  12. #112
    Master
    Join Date
    Dec 2007
    Location
    Warwickshire
    Posts
    1,354

    Re: A complete watch.

    Any updates Bob?

  13. #113
    Thomas Reid
    Join Date
    Apr 2004
    Location
    Oxford, UK
    Posts
    20,326

    Re: A complete watch.

    Not at the moment. I had less time this summer than I expected for watch stuff, and spent most of it working on dials.

    Best wishes,
    Bob

  14. #114
    Master studs's Avatar
    Join Date
    Nov 2008
    Location
    NE Scotland
    Posts
    1,061

    Re: A complete watch.

    A very interesting read, thanks for sharing your experiences... hope you get a chance to complete this project soon.

    Best wishes from a fellow (though technically inferior) tinkerer. :wink:

  15. #115
    Master
    Join Date
    Dec 2008
    Location
    LONDON, UK
    Posts
    4,142

    Re: A complete watch.

    Best of luck mate.....sounds like a really hard challeneg to take on....I wish I had the time and patience....

  16. #116
    Craftsman
    Join Date
    Jul 2008
    Location
    west yorkshire
    Posts
    781

    Re: A complete watch.

    Bob,

    I have really enjoyed reading this thread and admire the work you've done. I hope you are in good health and I look forward to any updates on this project.

    Ben

  17. #117
    Craftsman
    Join Date
    Feb 2009
    Location
    Herning, Denmark
    Posts
    424

    Re: A complete watch.

    Looks amazing. Great job

  18. #118
    Master
    Join Date
    Nov 2008
    Location
    West Wales
    Posts
    2,783

    Re: A complete watch.

    Without a shadow of a doubt the best post I have ever read on ANY watch forum, many thanks.

    Dave

  19. #119
    Master Chartman69's Avatar
    Join Date
    Aug 2008
    Location
    Life is like a fridge , you only get out what you put in !
    Posts
    9,546
    Blog Entries
    1

    Re: A complete watch.

    Wow Bob , what a read :shock: Hope the next stage of this project is published here soon , been on here quite a while and only just stumbled on your thread, glad I did though. :)

    Ian.

  20. #120
    Master
    Join Date
    Mar 2005
    Location
    Bellville, Texas
    Posts
    3,772

    Re: A complete watch.

    Hey Bob,

    Like other poster dudes before, I've just found this forum and your fine thread ;-)

    Was going to do something like it myself but I now cede happily to the Master!

  21. #121
    Thomas Reid
    Join Date
    Apr 2004
    Location
    Oxford, UK
    Posts
    20,326

    Re: A complete watch.

    I got a bit distracted. Mostly by work and some family responsibilities, but also by wanting to learn how to do some photography, and sorting out some dial printing stuff and some tool stuff. However, term ends for me tomorrow. :)

    Best wishes,
    Bob

  22. #122
    Grand Master Chris_in_the_UK's Avatar
    Join Date
    Nov 2004
    Location
    Norf Yorks
    Posts
    43,603

    Re: A complete watch.

    Quote Originally Posted by rfrazier
    I got a bit distracted. Mostly by work and some family responsibilities, but also by wanting to learn how to do some photography, and sorting out some dial printing stuff and some tool stuff. However, term ends for me tomorrow. :)

    Best wishes,
    Bob
    Looking forward to it Bob :)
    When you look long into an abyss, the abyss looks long into you.........

  23. #123

    Re: A complete watch.

    :shock: Wheres the rest?? Amazing thread

  24. #124
    Thomas Reid
    Join Date
    Apr 2004
    Location
    Oxford, UK
    Posts
    20,326

    Re: A complete watch.

    It looks like I should move this close to the top of my priorities.

    Best wishes,
    Bob

  25. #125
    Apprentice
    Join Date
    Aug 2009
    Location
    Cape Town
    Posts
    13

    Re: A complete watch.

    Please - I have been on the edge of my seat for a while now. This is a superbly inspiring post by the way - I am trying to make my own dial and reassemble a watch myself now. Thank you.

  26. #126
    limpsfield
    Guest

    Re: A complete watch.

    Just a quick message to say I have read from the start this evening and I too am looking forward to the next stage.

    Fascinating read.

  27. #127
    Grand Master AlphaOmega's Avatar
    Join Date
    Jun 2009
    Location
    Trinovantum
    Posts
    11,313

    Re: A complete watch.

    This is very helpful and informative, and any further updates would be eagerly anticipated :)

  28. #128
    Craftsman
    Join Date
    Jul 2009
    Location
    Londonium
    Posts
    386

    Re: A complete watch.

    ..thanks for an amazing thread... looking forward to seeign where this ends up :)

  29. #129
    denisjhon
    Guest

    Re: A complete watch.

    Hi!
    I am quiet impressed with the information that you guys are sharing through this thread. I am looking forward to more information through this forum. These information might be useful to me.

  30. #130

    Re: A complete watch.

    Superb

  31. #131

    Re: A complete watch.

    A very interesting thread

  32. #132

    Re: A complete watch.

    Have you not finished it yet?

  33. #133
    Thomas Reid
    Join Date
    Apr 2004
    Location
    Oxford, UK
    Posts
    20,326

    Re: A complete watch.

    Quote Originally Posted by Jolenefm
    Have you not finished it yet?
    A few times, sort of. The problem is that I kept changing my mind about the movement. So, I have to sort out a new one (i.e., get running), make a dial, etc. Then I got distracted.

    Best wishes,
    Bob

  34. #134
    Journeyman
    Join Date
    Jun 2009
    Location
    Ireland
    Posts
    97

    Re: A complete watch.

    Great thread and superb pictures. I'd love to see the finished article.

  35. #135

    Re: A complete watch.

    Very informative, looking forward to the rest.

  36. #136

    Re: A complete watch.

    Not only a great thread, but a very long running one. Extremely interesting read and can't wait to see the final result.

    Mark

  37. #137
    Craftsman
    Join Date
    Feb 2009
    Location
    Sunny Edinburgh
    Posts
    373

    Re: A complete watch.

    As many people have said before, but what a great thread. Really informative for a noob like me. A bit scary if im honest thinking about all the tools I might need to buy! By the looks of it they could be more expensive than the watches!! :shock:

    Leiper

  38. #138

    Re: A complete watch.

    This will be really interesting

  39. #139

    Re: A complete watch.

    Great Photos

  40. #140
    Master
    Join Date
    Mar 2009
    Location
    London
    Posts
    3,181

    Re: A complete watch.

    A hugely informative and interesting thread Bob! Fantastic photos with easily digestable descriptions along the way. You really have quite a skill. 8)

    I'm very much looking forward to seeing the project completed and will follow this thread closely. Good luck and keep at it! :)

    Chris

  41. #141

    Re: A complete watch.

    Very informative, great pictures.

  42. #142

    Re: A complete watch.

    very intructive subject, i learnt a lot in here,
    thankx for great pictures as well

  43. #143
    Craftsman
    Join Date
    Feb 2010
    Location
    Wirral
    Posts
    552

    Re: A complete watch.

    Any updates on this? :D

  44. #144

    Re: A complete watch.

    Awesome thread and great work. No pics of finished article ? :)

  45. #145

    Re: A complete watch.

    really interesting. accidentally broke the hands ofF the tissot i was practicing on ! so here to learn

    Kev

  46. #146
    Journeyman
    Join Date
    Aug 2011
    Location
    Vilnius, Lithuania
    Posts
    195

    Re: A complete watch.

    It takes a lot of time to make a watch.
    Impressive tools and work.

  47. #147

    Re: A complete watch.

    We are waiting patiantly for the rest :-)

  48. #148

    Re: A complete watch.

    Nooooooooo!

    Just found this and assumed I was going to see the story from beginning to end. What happened?!?

  49. #149

    Re: A complete watch.

    A truly amazing and informative read, really looking forward to the next installment.

  50. #150
    Craftsman hyl1987's Avatar
    Join Date
    Sep 2011
    Location
    SE London
    Posts
    403

    Re: A complete watch.

    I was hoping to see the end product. But anyway I'll be eagerly awaiting your final result!

    This is definitely the best post I've seen.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Do Not Sell My Personal Information