Interesting!
Did you replace the gaskets, or use the ones it came with?
I've been curious about Amphibia watches for a while so I decided I would get one to play with. One of the main things that interested me was the different approach to making the case water resistant (please excuse the Hodinkie link but it explains it better than I can) https://www.hodinkee.com/articles/vostok-amphibia
I bought one of fleabay that looked in good condition but needed some movement work, so I wouldn't feel bad when I tried to destroy it in the pressure tester
I uncased the movement because having had a quick look when it arrived I thought it would be interesting to try and repair.
The watches are marked as being 200m water resistant, and right enough I wound the tester straight up to 20 bar without any problem
I then started to take the pressure up 5 bar at a time giving the watch a couple of minutes at each step to settle and so that I could look for any leaks.
Much to my surprise this continued up to 40 bar ! (approx. 400m) where I decided to stop as a sudden catastrophic fail at that pressure could potentially damage the pressure tester and at £5k they are not cheap to replace (yes I know I'm a coward )
I left the case sitting at 40 bar for over 15 minutes without any sign of a leak. Not bad for a cheap Russian toy If I remember correctly the current SCUBA world record is around 332m
PS I take no responsibility for anyone else's watch letting water in.
Interesting!
Did you replace the gaskets, or use the ones it came with?
awesome stuff! I half expected this thread to end at 50m with a crack and a bang. I need to get another Amphibia, I've had maybe half a dozen but none have hung around long... so obviously I need to get another one to sell on.
They really are a design marvel.
Don't just do something, sit there. - TNH
Interesting :) Do you have any further info/photos of that pressure tester? Is it a wet, and dry tester, or only a dry tester? If the latter, how does it detect a leak?
I found some info on this Roxer, what confuses me is it operates completely different to my Bergeon 5555/98 whereas you can dry test it above the water line, and then retest, and whilst under pressure, lower watch case into the water, then slowly release the pressure, which, if any leaks present would show in the form of a steady flow off bobbles from the leaking area.
Last edited by SSTEEL; 10th July 2017 at 13:46.
https://www.roxer.ch/en/products/wat...atator-40-125/
it is an older 125 model a wet test,
the dry testers measure deformation of the case/crystal, because the amphibia case is designed to compress under pressure it makes the dry tester unreliable for these watches
When you crank the handle on the side of the machine it increases the pressure in the tank, if the watch case starts to fill with water then there is a leak. The bergeon tester relies on the higher pressure inside the case escaping as a stream of bubbles to show a fail when the pressure is released in the chamber.
the real advantage of the wet tester is that it can go up to 1250m most of the air/dry testers can only get to 100m
Great post and thanks for sharing. They really are fantastic little watches for the money.
No doubt some people will still be afraid to wear one in the shower....
Really interesting - thanks for posting this.
When you take into consideration the elegant and highly effective design these really are astonishing value for money.
Another result for the best, cheap diver you can buy. I love Amphibias
And you could have got one dirt cheap as I offered it up to the Fundraiser cause. MakeColdplayHistory won it and passed it on.
Sent from my iPhone using TZ-UK mobile app
Very impressive Ian
Good luck everybody. Have a good one.
I love posts like this. But what's with the finger condom?
Thanks go sharing, great post. I've never had an amphibia either, something else to have a nosey at...
I'm really enjoying this Amphibian 420SE from Meranom. The case design including caseback and crystal are really interesting. Glad to know the design works so well, too!
Last edited by williemays; 14th July 2017 at 17:51. Reason: Replacing Photobucket image
Great little thread.
I must admit, I felt my Vostok felt as flimsy as anything and I wouldn't have trusted it near the washing up, but it seems the unique design really is capable.
I'll have to give one another go!
M
Cool test! Thanks
Sent from my iPhone using Tapatalk
Nice test Ian, the Vostocks are the Russian equivalent of EPSA's Super Compressor cases, built with a locking ring, less critical tolerances and no apparent loss of performance. As Boney M once said, "Oh those Russians"
Get one made, mine goes up to 300bar and will do 400bar with additional clamps.
Bry1973 who is a poster here made it and it works beautifully. I've replaced the pump seals once in the time I've had it as it slowly dropped pressure and I couldn't be sure if it was the seals or the watch leaking. I think Bry once tested a G-shock in this to 100bar with no ill effects!
I've regularly scuba dived with mine, great little watches.
Cheers..
Jase
I have a really old Soviet era one that I've been debating whether to take swimming. I'm even more tempted now...
If anyone is interested this story continues in another thread
http://forum.tz-uk.com/showthread.ph...Results-are-in!