Miyota 9039 ETA 2824-2 dial feet and hands interchangeable?

[Rev-O]

Hi All

I have a watch with a ETA 2824-2 and I wondering whether I can put a dial and handset from a Miyota 9039 on it?

Are the feet in the same position? And is the canon pinion the same?

Thanks

EDIT: according to those who know, no. I'll pop this here for future reference should any of you be tempted to try it.

[huytonman]

I recently swapped out a knackered SW200 fitted into a lowish cost micro brand watch for a PT5000 bought from Ali Express for about £40..so far its running within COSC (how long for time will tell) so maybe something to consider instead as it should be a drop in for the ETA
Keith

[TomGW]

Hi All

I have a watch with a ETA 2824-2 and I wondering whether I can put a dial and handset from a Miyota 9039 on it?

Are the feet in the same position? And is the canon pinion the same?

Thanks

EDIT: according to those who know, no. I'll pop this here for future reference should any of you be tempted to try it.

Another NO.
If it's really important to you, the dial feet could be removed and either use 'dial dots' or have new feet soldered to suit the ETA 2824 - James Hyman (dreamboat10) is your man. No go with the hands though.