That's lovely.
Here's my 1981 Honda CX500.
That's a thing of beauty, I'd love another one of those.
My ambitions are more modest at the moment, I ride this:
And I hope one day I'll do justice to this:
which, when put back together should look like this (not mine, obviously):
Nice Beemer , I had a r60/5, which went and replaced by a r100gspd.
Here's one of mine - quite some years ago. It's now in the garage in a permanent state of being 75% restored.
That BMW is lovely, i used to have a R100RS back in the day, liked it.
Last edited by E_2_Right-Force; 9th October 2014 at 15:50.
I have this :
Cherry RS!
Unfortunately, this is the only vintage bike I have at the moment:
Fortunately, it is a keeper.
I knew I could trust the TZ lot to deliver.
Some cracking machinery. Keep it coming!
Love that Honda 125. And Neil, you must get your Beemer rebuilt! It looks fab.
Chaps
I run a 1960 BSA 650cc twin and really I suppose without a pic you won't believe me.
I shall try and sort something out.
Regards
Mick
Tell us more, please? I'm guessing 1974/5 Strada...does it have some significance for you?
My recollection of Italian motorcycles of that era is Brembo brakes (good) and Veglia (the name escapes me as I remember) instruments (fictional data). How do those pipes look so good?
Last edited by PickleB; 8th August 2014 at 09:51. Reason: return of memory
What is that, please? A picture of Jarno Saarinen's Yamaha 250 cc V-twin adorned my wall for a long time. As I recall, it had a lot of gears and revved to 16,000 rpm.
PS By shifting my (not inconsiderable) weight, I managed a wheelie on a FS1E. Sorry to mention another Yamaha.
I am in search for this one...
I have a few....
XT500 Motard isn't finished in that pic obviously, its almost done now. LC is a 421cc with modern suspension. I also have a standard XL500R, part restored RD350F1 YPVS, Honda MT250 with CR engine parts and a 31K YPVS like Simons, ie in bits... tho mine will be modified. Stories are on my 2smoked.com site if you want to read em, grab coffee / beer tho, its quite involved LOL I reckon bikes are very much like watches, they get under your skin... well the dirt gets under your nails at least LOL!
Loving the Suzi 125 Shaun!
Last edited by JonW; 7th August 2014 at 00:53.
It is a mish mash made up from various Suzuki 125 cc models but road legal (Daytime MOT) and stripped of all weight with the engine tuned to near limits but geared so it is just rideable on the road but as you need to keep it in a very narrow and high power band to get anywhere and you will notice the full expansion pipe so it sounds like something out of a 125 GP circa 1972 (Glorious)
My homegrown beemer, as I fancied pin stripe and classic look with "modern" size (as the old post war bikes are too small for me):
Its been a R80ST originally. Just had its 30th birthday.
Last edited by bmwrover; 7th August 2014 at 10:48.
The nicest colour scheme for the 100RS.
I had one in silver years ago, that I bought from my father, who bought it from a traffic cop. The way the whole thing torques to the side when you rev it at the lights always made me smile.
It was the only bike I've ever ridden that I got waved to by police motorcyclists!
Had a few old bikes, from an RE5 Suzuki with the rotary engine to some 50's Brits through to a 31 Indian 4. I'm away at the mo but will try to dig out some pics when I'm back.
Malc
I'd love an old BSA c15Trials bike just to potter around on.
SNAP!! Love this colour. Sadly couldn't collect it today as the chap was busy, and it now looks like I'll be getting wet on the way back from Surrey tomorrow. Oh well, lets hope the fairing keeps most of the water off!
Love your R80 BMWrover - more details and more pics needed!
hers mine i also have a tatty c15 as well sadly they are both being sold as i just dont have time to use them
Last edited by mav112; 7th August 2014 at 23:02.
I'm very envious of you picking your "new" R100RS up tomorrow (even in the wet), reading this thread and looking at these beautiful machines has really got me pining for my old bike.
The thought of a long day in the saddle, riding some lightly trafficed back roads, listening to the burble of those twin exhausts whilst safely ensconced behind the worlds first fully aerodynamic fairing along with a riding position that strikes the perfect balance between comfort and sporting, only the road and the bike to occupy the mind ..............
What a beautiful Enfield, is it a Meteor Minor? I do have a soft spot for Royal Enfields after buying a basket case Continental GT as a 14 year old and restoring it ready for my 17th birthday. Here it is with my old C15 back in the 1970's complete with clip ons and bacon slicers!
My apologies, a little more research and I believe my picture was of the 1973 Yamaha YZR 500 OW 20. So, wrong size and twice as many cylinders (inclined and in-line)!
Edit:
"By clever design the inline engine was kept as narrow as a V-Four and remained very well balanced throughout its rev range, In the early part of 1972 this radical engine was fully developed and by September that same year a complete machine was up and running.
The very first race bike was a piston port design and initially deemed too peaky by the intended GP rider Jarno Saarinen." See: link.
So, maybe, I didn't get it all wrong?
Last edited by PickleB; 8th August 2014 at 22:28.
Frame is now prepped for painting you'll be glad to hear! Determined not to do a half arsed job and have a 7 year old's social life to deal with so progress is slow, but once it's painted the bits go back on! If I ever do another one, and it's unlikely, I will never do the frame myself again!
Tell me more!
Nice thread.
This was my late father and the bike he owned from the 50's til he passed away in the 90's.
Manx 'Inter' Norton.
Greg.
No apologies necessary!
My remarks related to his 250cc Yamahas.
It looked like he was likely to win the 500 WC by a country mile at the time of his and Renzo's tragic accident on 250's.
Catch his ride winning the Imola 200 on the TZ350 blowing the TR750 and H2R's into the weeds!
Good news on the frame, bet your fingers hurt LOL!
full details on my ramble around whether to build the 31k as a resto or modified and then the hunt for parts, and then... well, grab a coffee/beer and read on, its two pages... LOL
http://2smoked.com/Yamaha_RZ350_RD35..._1983_31k.html
As of this week Im dry building it a bit, and it looks like this:
Last edited by JonW; 13th August 2014 at 02:47.
Very nice. Question for you - those handlebars - are the proper 22mm or did you have to modify the clamps to make them fit? If they are proper 22mm - can you tell me where I can get them please?! Ongoing problem for me trying to find handlebars that fit properly with resorting to the dremel.....
Thanks.
Handlebars were standard 22mm diameter, but to find the right handlebar took at least four attempts, very flat street bar (too low), chrome touring bar (too boring), BMW moto cross style bar (okay, but distracts from the lamp/speedo combo) so in the end that medium heights and wide touring bar I like the best. I think its a Lucas 90924 (at least thats what the MoT guy wrote in my paperwork after approval of the changes (strict German TUV :-(
I have, thanks. The problem is that most bars marked up as "22mm" are actually something like 22.2mm, which is the old imperial 7⁄8". Old BM's require exactly 22mm, otherwise it is virtually impossible to get the switchgear clamps over the bars. I already have about 4 or 5 bars in the garage which I specifically asked if they were exactly 22mm before buying - none of them fit!
Thanks for this - I will have a go with the Lucas 90924 then.
N
Neil, I looked it up for you, It is a "Lucas TWR Classic High" handlebar and despite the fact I opted for the black painted one, I had no problems sliding over the BMW switch gear.