First attempt at lume painting

Printable View

22nd January 2023, 12:34
Sinnlover

First attempt at lume painting

I have had this watch for a while now and it never worn, the main reason there was no lume on the dial, only the hands
So I figured I would give painting some lume the dial a go.
Before
https://uploads.tapatalk-cdn.com/202...a6c84b392c.jpg

After
https://uploads.tapatalk-cdn.com/202...2b6811e4fc.jpg

And it does glow
https://uploads.tapatalk-cdn.com/202...e89434da7f.jpg

It’s not the neatest job but it will do for me and will likely mean the watch will get a bit more wear than before.

For reference I used one of the lume kits with syringe applicator, the paint was a bit more fluid than I thought it would be so I am glad I gave it a bit of practice on some card before attempting the dial.
22nd January 2023, 23:17
Robbo12

I think that's quite a good job for a fist attempt well done .

I have always been nervous at lume plots , have done a few hands which are easier.
23rd January 2023, 09:46
hughtrimble

Great work on tailoring something to your own needs and with your own effort
24th January 2023, 00:43
mr.chef

Looks like an MOD dial
24th January 2023, 18:14
Sinnlover

Quote:

Originally Posted by mr.chef

Looks like an MOD dial

It does have a certain rough and ready quality
14th February 2023, 13:08
walkerwek1958

I'm no expert at re-luming, I relume hands when I have to but dials are much more challenging with little scope for error and the potential to spoil an otherwise good dial.

I use the Bergeon lume kit which is now getting expensive, but it allows the lume to be mixed correctly to achieve the right consistency and that's the key to getting it right in my experience. Also allows colours to be mixed, which is v. important.

Not my favourite job!
18th March 2023, 14:12
Sinnlover

First attempt at lume painting

Ok so this morning I had a go at reluming the bezel pip of my new watch.( See the bear pit moan and rant thread)
The lume on these often falls out as it’s was just a tritium plot of paint in the steel bezel
After initial set back I mixed a dollop of lume with the Mrs clear nail varnish and painted a thin layer in recess. I let it dry and then added a few more layers each time letting it dry
One last coat of clear nail varnish over and this is the result.
I have no idea if it will stick in the recess, but I think it was worth a try.
It a pretty good match with the original so tritium lume and it glows at about the same rate when exposed to light it also fades quite quickly
Before

https://uploads.tapatalk-cdn.com/202...c3292faab7.jpg

After (I need to clean it up a bit)
https://uploads.tapatalk-cdn.com/202...cb2d0db7fd.jpg

In the dark
https://uploads.tapatalk-cdn.com/202...497a4b3756.jpg

I am quite happy with it