One of my older ones was loosing bits of the case , which was bothering me , but , replacement "scales" are available for a tenner and easily fitted,<br>Happy with the result
https://i.imgur.com/iQGFIF7.jpg
Printable View
One of my older ones was loosing bits of the case , which was bothering me , but , replacement "scales" are available for a tenner and easily fitted,<br>Happy with the result
https://i.imgur.com/iQGFIF7.jpg
Where do you buy “parts” and how easy is it to dismantle - and, more importantly, reassemble?
Thanks.
I did the same recently too, but I went for the green scales.
Very easy to do, flat blade in the edges just prises the old scales off, and the new ones are a press fit on. I found a eBay seller for the replacements, £11 I think, really refreshes the SAK nicely.
It was a bit of a upgrade too, the new scales came with the pen slot which the original ones didn't have, so ordered a pen too.
https://photos.smugmug.com/photos/i-...9qmFZQK-X2.jpg
I know modding and switching out SAK knives is a rabbit hole, but I've a couple of old ones that could do with a refresh - thanks for posting, I think I'll give it a go!
I went on a full Victorinox Alox binge a few months ago, got to 6 before I realised I’d probably never really use any of them apart from the first - an Alox mini champ - that now lives on my keys. They are pretty cool things to collect though!
Sent from my iPhone using Tapatalk
Apparently the trick is to soak everything in very hot water first, makes the whole process much easierQuote:
Originally Posted by JasonM
Sent from my iPhone using Tapatalk
This is who I got them fromQuote:
Originally Posted by Qatar-wol
https://www.ebay.co.uk/sch/human-201...p2047675.l2562
Bits came from http://www.ukoutdoorstore.co.uk . The scales are easily prised off and , as has been mentioned, I heated the scales and bare knife in hot water, not boiling but 70/80 degrees C for a few mins and them pressed the scales into place, one side at a time and it was very straightforward,Quote:
Originally Posted by David_D
Quote:
Originally Posted by notnowkato
Thanks! I’ll have a look.
Thank you! When I'm out of hotel quarantine, I'll have a proper look!Quote:
Originally Posted by JasonM
While we're talking SAKs, I thought I'd show this off - it's on my desk and I have little else to do with my time! A gift from my department when I left employment a couple of weeks ago!
https://i.imgur.com/4hBzkj4.jpg
https://i.imgur.com/gSSzwu8.jpg
https://i.imgur.com/WO91yK5.jpg
That's a proper leaving gift, did you get a heavy duty belt on which to hang it as well???Quote:
Originally Posted by Qatar-wol
Thinking of sending mychamp back for a refurb. Only decent thing an ex-wife ever gave me . Had it for about 28 years .
Also foolishly dismantled my leatherman ti as I’d bent the blade lock . Figured it was easy to straighten and reassemble . Think I’ll have to build a jig to get the bolts back in .
Quote:
Originally Posted by Mr.D
Send it to Whitby .
Can't praise these guys enough. The micro eyeglass screwdriver finally snapped on my Charge TTI after 10 years of service. Although it was a consumable item and was out of stock, they sourced one for me and posted it out to me free of charge.Quote:
Originally Posted by magirus
Thanks for this, I have just ordered a set for my knife, which saw a lot of action during my career and is now looking a bit tired. Going from red to black.
Victorinox and Leatherman have a lifetime guarantee.
There’s a place in Leicester called Burton McCall who,
If you send your damaged knife to will refurb and return for free.
My champ went off with broken side plates. I took out the pen, tweezers screwdriver and toothpick
Before sending and it came back as new with all the little tools replaced.
Truly excellent service.... and FREE !
That wouldn't cover damaged scales.Quote:
Originally Posted by John Wall
'Damage caused by normal wear and tear, misuse or abuse are not covered by this guarantee'.
Well, it did for mine.Quote:
Originally Posted by K-Z1R
Is Wenger a bit more problematic these days, availability of scales, parts that sort of thing? Wenger ceased 10+ years ago, different sizes and patterns to Victorinox and Wenger and Victorinox scales are attached entirely differently. The Victorinox Evo pattern is based on a former Wenger model but I’m not sure if it is interchangeable with with the original Wenger pattern. Hope it gets sorted for you.Quote:
Originally Posted by Weirdfish
Sent from my iPad using Tapatalk
I brought my Explorer out of retirement recently to keep in a Lands End Square Rigger shoulder bag I've started using again. The bag is older than my son, so easily 30yrs old, and I'm pretty sure the knife was bought when I was 20, so that's 44yrs old! Gave it a good clean, oiled the pivots, got the blades back to shaving sharp with the Lansky and buffed the scales to take away the dullness. I left the scales on rather than replace them because there's a couple of epoxy repairs and various dings that are part of it's history. I had to buy a new spring for the scissors and also added a glasses screwdriver on the corkscrew. The blade steel takes a lovely edge. My old fire brigade number is still on there where I scratched it all those years ago, I kept it on a cord in my fire tunic.
https://photos.smugmug.com/photos/i-...-5jcmhrc-L.jpg
https://photos.smugmug.com/photos/i-...PGvqNJ6-XL.jpg
https://photos.smugmug.com/photos/i-...-D9SSFWp-L.jpg
https://photos.smugmug.com/photos/i-...q57ZQbL-XL.jpg
Splendid YT channel on these puppies
https://youtube.com/c/FelixImmler
Quote:
Originally Posted by magirus
These are, quite literally, the " Swiss Army Knives" of the penknife world, in my view ...........................
Lots of memories held by these pieces of kit. One of mine includes having to cut down a suicide victim and saying to my colleague 'Do you want to catch him or shall I?' He replied ' Well you have the knife, so you cut and i'll catch'. I then remember having to assist catching the falling body and making sure I didn't stab it!Quote:
Originally Posted by magirus
This fella has been with me for many years and seen a lot of action over that time.
It's been around the world (twice), done hundreds of dives, confiscated several times and helped me out on countless ocassions.
It'd never occured to me to get it repaired, but thanks to the posts here I've just ordered some replacement scales and am upgrading it to a Plus. :thumbsup:
https://hosting.photobucket.com/imag...3_1_201_a.heic
https://hosting.photobucket.com/imag...F_1_201_a.heic
R
~1991?Quote:
Originally Posted by ralphy
Sent from my iPad using Tapatalk
I constantly got through a cycle of finding and loosing mine.
I think I may have to buy multiple and stash them everywhere!
Sent from my SM-G998B using Tapatalk
Only way to do it, one with bike, one with canoe gear, one with camper van, one in daypack, one for best unused with box and papers.Quote:
Originally Posted by v15hal
All the same or different models?
Sent from my iPad using Tapatalk
Quote:
Originally Posted by ralphy
I highly reccomend Victorinox own oil for all knives,its food safe and lubricates better than anything.
You can add a pen and a pin to plus scales and a mini driver that fits in the corkscrew.
Felix is addictive watching.
https://www.youtube.com/watch?v=Ds440bc5eGs
Agrees.Quote:
Originally Posted by BillyCasper
I've managed to have a few confiscated at airports as I used to fly a lot for work.
So I'll start buying them again.
All different! Need a bit of variety!
Sent from my SM-G998B using Tapatalk
Probably about right! How can you tell?Quote:
Originally Posted by BillyCasper
Such was my attachment to mine I obtained permission to leave security and go back to landside in order to post it back home. On another trip I was approaching the Immigration desk on my return landing back in the UK and the officer at the desk pointed out my Swiss knife hanging out of my flight bag on its lanyard. Two of the many memories of the knife.Quote:
Originally Posted by v15hal
R
Quote:
Originally Posted by ralphy
You may find these links of interest Ralph.
https://www.sakhome.com/304372180
https://forum.multitool.org/index.php?topic=75774.0
https://www.victorinox.com/uk/en/Swi...iss-army-knife
My sheer pointless male geekery. A bit like the detail of minor variations on watches.Quote:
Originally Posted by ralphy
1991, the first year for the hook back tool and last year for the scissors with a screwed pivot, thereafter changed to a brass or steel rivet.
Pattern of the stampings on the main blade tang is a normal way of dating SAKs.
SAKWIKI is a primary source of information together with the forum referenced above.
Apparently the hook was introduced because Swiss people bound their recycled newspapers in string and it’s a way of carrying the packages to the bin or recycling point. Maybe true, maybe not. The hook has many uses including securing the scale pen in a more comfortable writing position. I can’t remember ever using the hook.
Sent from my iPad using Tapatalk
Oh my word, I had no idea of the depth of detail!Quote:
Originally Posted by magirus
Oh my word, again!Quote:
Originally Posted by BillyCasper
I've used the hook frequently to loosen knots in paracord at which, along with the reamer, it is superb. Also for pulling wires through holes.\
R
Replacement parts have arrived and duly fitted.
As you can see, I decided to upgrade at the same time to a Plus...
https://hosting.photobucket.com/imag...B_1_201_a.heic
Good to see the availability of parts, old-fashioned service at the best.
R