Printable View
I had never really thought about them until I took the bracelet off my Sinn and put it on a Nato, but spring bars are puny little things aren't they, the bracelet is screwed together and threadlok'd, the Nato is pretty well made, and it all relies on a couple of tiny bits of metal. So.... are there good ones and bad ones?
Not equal.
A lot of crap ones around.
Finding good spring bars is not easy. The size and shape of the sprung pins, lengths and diameters seem infinite, and I am yet to get a good box that work well!
Always used Cousins for spring bars. Never had a problem. Usually Swiss made 1.8mm stainless steel single flange (ooh, matron!). The bead (the bit that seats in the case) on the single flange is thicker than on the double flange (I'll let you make your own jokes up).
Is it the Rolex generic ones you go for?Quote:
Originally Posted by Geralt
I think it also depends how rough you are with them. Grimaced the other week as I watched a friend rip his watch on an Erika’s off his wrist. Could almost hear the bars bending as he did it
I'll have a Google and see where I can find them, thanks.Quote:
Originally Posted by Geralt
I'd be interested in a source for some good ones. I have millions of them, but most have come free with various straps and I have no idea what they are like.
I've got more than I'll ever need, but I've not got a clue if they're any good or not, time to bin the lot and buy some ones I know are decent I think.Quote:
Originally Posted by MurrayMint
Just go to cousins.
No, these are the ones I use: https://www.cousinsuk.com/product/si...23mm-iso-swissQuote:
Originally Posted by simonsays
I've used Cousins and twenty(o) on ebay and not had any problems, barring my own mistakes in ordering wrong sizes etc.Quote:
Originally Posted by seadog1408
FYI, there are many types out there:
http://www.ofrei.com/images/newspringbarban.jpg
Same here. I've got loads of s**te ones and time to get some decent quality ones.Quote:
Originally Posted by junglebert
Take that on board.Quote:
Originally Posted by seadog1408
Same here, preferably avoiding Cousins.Quote:
Originally Posted by MurrayMint
I like Vostoks if they'll fit (you can order new ones from Meranom). They are really solid, without being completely oversized like Seiko fat bars (which are great, but only fit on Seikos). They don't come in all sizes though, and sometimes they are too thick, if the lugs are especially narrow or shrouded.
The rest of mine are fairly generic and while there's a small amount of variation between them, it's hard to point to any as being particularly better than others. I'd happily replace them all with anything that I know is solid and eliminates the occasional clicking they tend to produce as well.
Probably need a couple of different thicknesses too, since thicker is usually better, but bracelets tend to need especially thin ones. Not sure of the exact measurements but I can take two identical-looking springbars and find one to be a perfect fit in a bracelet while the other just won't fit in the hole.
Generally cousins for me, used the Swiss made like Geralt, single shoulder, curved, general rolex... no problems so far
Sent from my iPad using Tapatalk
Nice picture. Ta.Quote:
Originally Posted by sean
Sent from my CLT-L09 using Tapatalk