Anyone fancy a challenge?

I have a watch that I foolishly took apart to get a piece of fluff off the underside of the crystal. I managed to get the crown out but then couldn’t get it back in!!
During this process the seconds hand fell off....
As you can see from the photo all the bits are there
https://uploads.tapatalk-cdn.com/201...600e6d98c.heic
Can anyone help me out and put the thing back together as I love the watch.It’s not expensive but looks great.

It’ll be a no risk job, if it doesn’t work then no problem.

I’ll pay for your time of you fancy it

Let me know
Andy


Sent from my iPhone using Tapatalk

What movement?
Possibly needs dial off to realign the keyless works.
Is that a movement holding tab as well?

Dave

https://uploads.tapatalk-cdn.com/201...d8a7836f3.heic

This is the movement, doubt it’s eta, cheap Chinese probably.
Yes that’s the movement holding tab and screw


Sent from my iPhone using Tapatalk

It'll most likely be the keyless works beggared up.

I should say that the crown does go back in but doesn’t engage all the way. So the hands move when the crown is turned, there is no way to push the crown all the way in to stop the hands turning. If that makes sense.....!


Sent from my iPhone using TZ-UK mobile app

Keyless works Andy.

It seems like it may be f@#ked...


Sent from my iPhone using Tapatalk

Just needs resetting.

£50 fixable.

Have you tried pushing on the stem release when refitting the crown?

Looks like you’ve bent the seconds hand up a bit too