I have a Casio GW-M5610 currently sitting on a pair on NATO strap adaptors which are 22mm, and was wondering if anyone on here had converted the lug width from a 16mm to a 20mm so that a smaller NATO could be fitted.
Printable View
I have a Casio GW-M5610 currently sitting on a pair on NATO strap adaptors which are 22mm, and was wondering if anyone on here had converted the lug width from a 16mm to a 20mm so that a smaller NATO could be fitted.
I’d like my lugs pinned back, please. I’ve been known as wing nut ever since I was a kid.
Buy some 20mm adapters.
If cases are cheap have the lugs milled to 20mm if possible.
I asked about the same thing a while back - cant recall whether it was on here or another forum.
Anyway, a number of people cautioned about going down this route due to the danger of weakened lugs.
I didn't like the adapters either.
3D print a resin or black grey PA12 case.
3D metal printed casio case>>>
https://i.ibb.co/s5GV4xd/Screenshot-...13-38-26-1.jpg