Jet wash is ok, just don't direct it at the wheel bearings or chain.
R
Printable View
From November 2023...
I ended up with the R1250RS, which, as you good chaps noted at the time, worked out a bit similar to my GS. It's a great bike but... I kind of regretted not jumping in for a Speed Twin.
Fast forward just a couple of months, and it's time to fix the mistake. I was out tyre-kicking with my mate this morning and we wound up at Chester Triumph. They had a new Speed Twin with a custom colour. Although it may not be everyone's cuppa, for me it was just what I was looking for. The rest is history but I actually managed to "make a profit"* on the Beemer.
https://i.postimg.cc/XqHGkmZ1/IMG-9700.jpg
* Man maths at its finest.
I love that colour. Funny story, I saw that bike advertised on eBay and described as Navy Blue, so next time I was in there I saw Will and Ian behind the counter and admonished them for poor advertising and didn’t they know the difference between the different blues? They blamed the young sales lad and said they’d correct it. I have to say I’ve found Chester Triumph extremely helpful with my bobber build, Phil in the workshop is triumph through and through and came from Bill Smiths when they lost the Triumph Franchise. He’s given me loads of help and advise with my project.
I think you’ll enjoy the speed twin IMO it’s the pick of the bunch with the water cooled 1200 twins.👍👍
Thanks
And thanks again.
In their defence, they also have/had a custom blue one for sale...
https://i.ebayimg.com/images/g/D6IAA...wS/s-l1600.jpg
maybe that's the confusion? Either way, this was instantly the one for me. I believe it is Meriden blue (although the eBay advert says Meridian Blue!!!). It is good to hear there are good guys behind the scenes, as I'll definitely use them for the first service. After that, and for convenience, I may well go back to Staffs Triumph.
The Bobton now has its official side panels. Had the transfers made up by a local company, but I think it looks more like Babtan than Bobton, so I may have to get them to have another go.
https://i.postimg.cc/3wFK0c9V/IMG-1135.jpg
The later ZR7 also has a tensioner for the primary chain, sadly you need the ZR-7 cases to fit it. Link to camcoat here https://camcoatperformancecoatings.co.uk/
Seems like there’s some available at 50% off at Urban Rider too.
Downer Love the duck egg blue on that tank, I can see why it was a “ stop you in your tracks moment” great choice.
Tony ( Urban Rider) stop it ! , I have two wardrobes with bike jackets in , Im only equalled by you and Freddie Dobbs ;)
Thanks Tony! Just ordered one [emoji16]
Very tempted by one of the Temple vented jackets.
Sent from my iPhone using TZ-UK mobile app
Assuming the same master cylinder, discs and callipers, etc would you expect to feel any difference in braking efficiency between a single disc with a four pot calliper and a dual disc each with two pot callipers?
Yes, the two twin piston calipers would give better braking than the single four piston caliper assuming both are in good condition.
With the twin disc set up, you’ve twice the brake pad area acting on the discs even though the twin piston calipers aren’t as efficient as the four piston.
Talking of potential second bikes (:hello:), Triumph are knocking it out of the park at the moment.
Daytona 660
Thats going to be the perfect little sports bike for U.K. roads. Nimble with legendary triumph handling, and enough power to make it usable. But you watch people moan because it’s “only” 95PS.
Sports bike folk seem to think you need to spend £25k for 200bhp for a proper sports bike, then you need to fit anti wheelie, traction control etc etc etc to keep it all under control. You wouldn’t see which way they went with a decent rider on the roads around here on that little 660. I wish my knees would allow me a little roadster like that👍
It would be a perfect companion for the Bonnie. I've also been reading some amazing reviews for the Honda NC750X (DCT/auto), which would be a lovely little adv/tourer if I wanted to go down that route instead.
Anyway, not really planning for a second bike right now - I just want to get back on the T120 (which may be challenging in itself as I seem to have some post-operative nerve damage affecting my left leg/foot that will need resolving first).
Whilst the NC750 is an incredibly competent bike, most of the reports I’ve read say that, due to their competence, they are dull as ditchwater. The DCT Wouk’s certainly help if you are struggling with gear changes due to nerve damage though. I think you may get bored with it very quickly though.
The Daytona is, as said above, a perfect sized sports bike for anyone really but, unless they have designed it for those of us who are closer to pension age than school age, it could be a pain to ride. I like the idea of the R7 and Aprilia RS660 but feel they may be equally as uncomfortable.
The leg/foot issue has come as something of a shock, Dave, but instead of panicking I've been looking at potential solutions if the issue can't be resolved (worst case scenario, as it seems that physio could well be the answer). The Honda is one (and ,to be fair, it's a very good one offering both full auto and clutchless manual using paddles). Another, though, would be to fit an electronic gear change module (essentially, a couple of additional buttons near the grip, providing up/down/neutral gear changes) on the Bonnie.
I won't let anything stop me biking, that's for sure.
That’s the spirit![emoji106]
There’s so much out there now that there’s usually a solution that suits a persons needs.
There’s a guy down here with no legs, he rides a Polaris three wheeler with his wheelchair strapped to the back. I often see him out with his mates on bikes. Top man!
My favourite dealer fitted a system like this onto a Speedmaster like mine. The customer had a fused left ankle following a serious work related accident. In fact the same customer later swapped the Speedmaster for a 120 Bonny like yours and had the system swapped over.👍
Yes, as far as I recall it worked off a small compressor under the seat, and then a little control unit for the electrics. It was basically a quick shifter with some extra bits. It looked neater on the Bonneville than the Speedmaster due to the Bonny having more places to hide components.
Back in Hawes, having come over the Buttertubs Pass again. I got to Reeth over the moor road fromm Leyburn. Visibility is pretty rubbish beyond the middle distance, so it felt gloriously lonely up there. And then through the haze the much larger hills of Swaledale suddenly appeared around me. Quite a moment!
People are moaning because it's a backward step from the last Daytona with a steel frame, steel swingarm, non-adjustable shock and 20bhp down. It's basically a Trident with a few upgrades and a fairing and it's very unlikely you'll see any on the Supersport grids.
Just your left foot? Ian Hutchinson has a fused ankle so fitted a gear lever in place of the rear brake using a linkage that runs through the swingarm pivot, then a thumb lever on the LH bar for the rear brake.
https://www.asphaltandrubber.com/bik...yzf-r1-photos/
I realise many find the NC750 boring, but having tried one, I quite enjoyed it. Using the buttons to up and downshift was fun and on the back lanes I could not use much more power anyway. If I got bored, a foot shifter can be fitted. Its also practical, which again, many may find boring but it matters to me.
However, there is something about using the foot and hands to do gear changes I quite like (a bit like driving a manual car) so I didnt get one. However many one day and for commuting I can really see the benefits.
Also that daytona front end looks a lot like the old vfr 800 (not sure they are made any more) and I quite like that look.