Well, that’s one way to get it opened.
An angle grinder & chisel.
Was looking through an auction lot this morning and this very attractive triple six 16660 tritium Seadweller took my fancy, all looked good up until I seen something going on with the case back in the side image, the rest speaks for itself
Whoever tried to pry up the case back has actually torn the threads out of the case..
Last edited by murkeywaters; 31st August 2020 at 08:54.
Well, that’s one way to get it opened.
An angle grinder & chisel.
So a new case and case back. Job done what's the problem .
Seriously that's just ridiculous. Who would ever even contemplate doing that.
Sent from my SM-N960F using TZ-UK mobile app
My Snowflake came to me with two large slots cut into the outer edge of the caseback because someone wanted in and didn't have a Rolex case wrench. With laser welding you'd never know now.
On mine though, the case was fine, this one has been subjected to some really ham-fisted butchery.
Do you have an appetite for a project?
Dave
Imagine how much swarf and bits of metal are floating around that movement. I wouldn't pay £50 for that watch.
I’m surprised the rotor doesn’t appear to have any damage....
Sent from my iPhone using Tapatalk
Didn't someone on here get a quote of £3.5k for a full service and a replacement case. If so that's the cost of bringing it back to life. If the asking price reflects that then possibly an okay deal for someone.
Everyone’s allowed to be a bit cack-handed but that’s taken real thought, effort and execution
My thinking was it must have a shady past, if you knew the value of such a watch you wouldn't be hitting it with a dremel and screwdriver, real shame as the case looks really nice as in not over polished, and the dial and bezel have lovely patina..
I bet somebody will still bid very silly money for this
It also suggests the movement had stopped, as why else would you attempt to get into the watch?
Whoah ! I have been repairing watches for 50 years and that takes the prize for the most imbecilic intervention I have ever seen.
Pity Rolex don't have a museum.
Sent from my SM-A105FN using TZ-UK mobile app
What did it actually sell for or has it not been auctioned yet?
Would be interesting to know what it sold for and maybe the auctioneers comments.
Sent from my SM-N960F using TZ-UK mobile app
Currently 1 bid at £2500 plus 30% fees.
Auctioneers’s comments -
Gents Rolex Oyster Perpetual Date Sea-Dweller automatic wound wrist watch. Stainless steel case, 42mm on matching branded Rolex stainless steel oyster bracelet. Severely damaged case and rear cover, rotating bezel, black signed dial having luminated dot markers with baton quarters, outer minutes ring, luminated trade mark hands and date window to 3. Watch working on test.
If you could buy it for £5k or under including the fees then factor in £3k-£4k more for the service and replacement case it would be a good deal, providing the dial, hands and insert were retained. If they were going to be replaced it would make no sense.
would it be possible to salvage case by welding, spitting and polishing?
And will sell for more than, what you could by a undamaged one for. I have the parts to restore it, mid case and caseback, but waste of time bidding, what's the estimate on price.
Maybe the case could be salvaged but it would cost a lot of money but then again would be a lot cheaper than a new one.
As for the caseback it would make a good keyring or ornamental object somewhere.
Personally I'd have cased in clear resin and use it as a paper weight as a reminder never to slip with the angle grinder again
Sent from my SM-N960F using TZ-UK mobile app
Trouble with a service case and back is it does hurt the resale value but no choice regarding this watch, and doesn’t a service case lose the engraved serial number?
Would like to see the Rolex tech’s face when he see’s this watch!!
Just get the guy who butchered it originally to cut out the serial number & weld it onto the new case. Seems like an easy enough job for him Sent from my SM-N960F using TZ-UK mobile app
£2.5k -£3k estimate, already attracting a lot of interest though -
https://www.the-saleroom.com/en-gb/a...3-ac2700a2aca9
Where's the auction? Anyone got a link? Or if it's finished, what was the result?
Thank you!
Wasn't there a well known watchmaker called "The Butcher" who specialised in doing this kind of thing?
Serves me right for skimming! Thank you!
The end links look like a poor fit from the photo'.
Sent from my Nokia 3.1 using TZ-UK mobile app
Isn't someone on here a master with a lapping machine? I've seen a thread somewhere else if not here. It's repairable, everything is. I bet cheaper than a new case and case back too, but..... Oouch!
A lapping machine can't make new threads AFAIK. Case finishing, yes.
Sent from my Nokia 3.1 using TZ-UK mobile app
Call up Rolex service centre and ask how much for a new case and service, crucial for the man maths on this
Taking material away (cutting threads, milling or grinding to shape, polishing to finish) are achievable by many. Building the material back first is achievable too although there are probably less people with the skills and tools. It's all doable, not cheap, but cheaper than a new case? Probably. Takes effort to find someone capable of doing to a suitable standard though.
Whoever does not know how to hit the nail on the head should be asked not to hit it at all.
Friedrich Nietzsche
Pointless putting that amount of cost and effort in as it’ll never be the same or as strong as an original case, the amount of laser welding, milling, new threads being cut would be hit and miss that it would meet Rolex tolerances..
The only benefit of this is you keep the serial number but it’s a cut and shut job, as said a service case would hurt the value as the serial wouldn’t match the movement, would be good if someone here bought it and posted a thread on its progress.
The point is of someone wants a beater and can get it t done cheaper than the service parts
If only whoever did that had some patience, or the forethought to try the angle grinder before the screwdriver/chisel, they might have "got away with it." But WHAT were they thinking? If indeed they were.
Ouch, X marks the spot!
Wonders if the person opening the case in this way, was intending on also working on the movement !