closing tag is in template navbar
timefactors watches



TZ-UK Fundraiser
Results 1 to 9 of 9

Thread: Tag Heuer Dimensions

  1. #1
    Master
    Join Date
    Feb 2004
    Location
    Uk
    Posts
    7,384
    Blog Entries
    1

    Tag Heuer Dimensions

    Hi guys,

    Tag heuer caseback dims PLEASE.

    Thanks


  2. #2
    What model are you looking for? They won’t all be the same.

  3. #3
    Master
    Join Date
    Feb 2004
    Location
    Uk
    Posts
    7,384
    Blog Entries
    1
    Hi,

    Just want a selection.

  4. #4
    Master Seiko7A38's Avatar
    Join Date
    Jan 2010
    Location
    S.W. England
    Posts
    4,438
    I could give you the dimensions for the Yema N7 / N8's (Including the Spationaute III, Flygraf and a good many others), again - but then I know you're too busy / not interested. Funny thing, these watches have 6 round holes in the case-back, which a modified version of your non-marking tool might actually be perfectly designed for.



    PS - Same tool would also work for the Yema L5 (H601 powered) ana-digi Yachtingraf, Spationaute, etc..

    Last edited by Seiko7A38; 24th April 2018 at 18:24. Reason: Adding Yema L5 case-back photo

  5. #5
    Master
    Join Date
    Feb 2004
    Location
    Uk
    Posts
    7,384
    Blog Entries
    1
    Ok Paul,

    Please give me the 6 pin PCD details.

    Thanks

  6. #6
    Master Seiko7A38's Avatar
    Join Date
    Jan 2010
    Location
    S.W. England
    Posts
    4,438
    Glady, Bry: 6 pins - 1.85mm diameter on a 24.5mm P.C.D..


    PS - Not wishing to distract you from this challenge - have you thought about doing one for the Omega Seamaster 'Bond' quartz / chrono ?
    Again this calls for a round pin case-back removal tool, but with 5 pins not 6. I did one last year using a Jaxa - and it was a bit tricky !
    Last edited by Seiko7A38; 24th April 2018 at 16:26.

  7. #7
    Master
    Join Date
    Feb 2004
    Location
    Uk
    Posts
    7,384
    Blog Entries
    1
    Thanks Paul,

    I've ordered the Yema required part.

    And yes i've sold 5 pinned Omega openers before, the 5pinners can make PCD measuring tricky but with CAD as an aid not to bad.
    Last edited by Bry1975; 24th April 2018 at 18:35.

  8. #8
    Master Seiko7A38's Avatar
    Join Date
    Jan 2010
    Location
    S.W. England
    Posts
    4,438
    Quote Originally Posted by Bry1975 View Post
    Thanks Paul,

    I've ordered the Yema required part.
    You mean you don't make them yourself, Bry ?
    If that's the case, then we might need a quick sanity check.
    When I say 'P.C.D.' I mean diameter measured at the centerline of the pins - not as in your drawing.


  9. #9
    Master
    Join Date
    Feb 2004
    Location
    Uk
    Posts
    7,384
    Blog Entries
    1
    Pitch Circle Diameter - PCD.

    Yes I do all the pin drilling, grinding etc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Do Not Sell My Personal Information