Zacro Watch Adjustable Opener Back Case Press Closer Remover Repair Watchmaker Tool & Watch Case Back Opener Repair Remover Holder Tool https://www.amazon.co.uk/dp/B01N4BNK..._qeLuzbCZ118J7
Sent from my SM-G935F using Tapatalk
I've got a few quartz I want to put into storage. Being divers I guess most of them will have screwbacks. What's the best idiot proof tool for the job? Don't want to spend a fortune but want something fairly reliable as I don't want to mess up my watches. Thanks. Dave
Good luck everybody. Have a good one.
Zacro Watch Adjustable Opener Back Case Press Closer Remover Repair Watchmaker Tool & Watch Case Back Opener Repair Remover Holder Tool https://www.amazon.co.uk/dp/B01N4BNK..._qeLuzbCZ118J7
Sent from my SM-G935F using Tapatalk
Like trying to bore through a mountain with a carrot. OK, some casebacks will loosen this way but a lot won't.
A cheaper version of the Jaxa tool, a decent case clamp and a vice serve me well. The Jaxa tool has a variety of attachements and it contacts at 3 points rather than 2.
I recomend buying from Cousins, Gleaves or Walsh rather than Amazon or ebay. Far more likelihod of getting decent tools that'll do the job.
Paul
Im a big believer in not buying cheap tools Paul but I'm not going to use this much
Good luck everybody. Have a good one.
If you want to go with Amazon this imitation Jaxa is a better bet.
Three points of contact.
https://www.amazon.co.uk/Vktech-piec...NSNKVRPSHTKD1K
Cheers,
Neil.
You can get an actual jaxa one off ebay for a lot cheaper
http://www.ebay.co.uk/itm/Waterproof...kAAOSwymxVKTsO
Usually you can find a compromise with reasonable tools at reasonable prices, avoiding the really cheap stuff but not paying top price for the most expensive. It's what I call 'just gets by' quality and usually it works out OK
Personally I`d invest in a case clamp and place it in a sturdy vice. This allows plenty of downward pressure with the case opening tool and that's vital to avoid slipping.
Paul
I have a 3 pronged model I don't need as have upgraded to a horotec version. You can have it FOC if you want
Last edited by mr.chef; 27th June 2017 at 16:51.
Depends what "actual" means. I believe JAXA just refers to the design, so in that sense they are all genuine. From the logo on the box, that one is made by Anchor, an Indian company known for making reasonably good, but low-cost tools. The Bergeon (Swiss) version is about £200.
I'd be interested in any recommendations for a cheap-but-good JAXA myself because I've got one of the cheapie ones, but the threads have a tendency to loosen on their own and the pins are a bit wobbly. I'd be surprised if there's a lot of difference between the various sub-£20 makes though.
At the risk of stating the obvious, even the most expensive caseback opening device, when used carelessly or without skills and experience, can cause huge damage to any watch. I have even had casebacks scratched at "professional" jewellers - fortunately only on inexpensive quartz watches. Since then I have changed all my own batteries and not had any accidents, using a relatively cheap Chinese caseback opener. On most of those I have opened, a rubber ball would not have touched it - some of those backs are torqued up as if they were wheel nuts on a 38 tonne truck!
Naturally you will also be investing in pressure-testing equipment as well? :-)