Wow......... That is simply stunning!
VivaLeQuartz
I'm bemused by the twin Reed's regulators on that Go. A single regulator I understand and there's little to match it, but surely two just make it harder to regulate precisely as you will have to screw one screw in as you screw one out?
What am I missing, is it just to look pretty (which it definitely does)?
Here's a Patek 5170J
Could almost wear that the wrong way round.
Then one that you can wear whatever way, a UN skeleton
Malc
I asked the same question when a similar picture was shown in another thread. As I said in that thread, this watch is a complete strumpet of a timepiece. Nothing behind the kimono on this one ! Paul
I NEED to get a better camera than my phone :(
Omega Louis Brandt, 1st Series
Elgin Grade 581 B.W.Raymond
French Royal Exchange London
IWC Cal 53
Jaeger LeCoultre Inline
Longines Cal 18.72
71 jewel 475 parts 3 barrels Glashutte 100 series
Dornbluth with Gold chatons, 3/4 plate and Swan neck.
2.4 mm thick JLC ultra thin
ImageUploadedByTapatalk1345370338.044462.jpg
A cooking ETA
Magnified, skeletonised, DLC coated 2892
BTR front and back.
Yes very interesting, I wonder where the movement came from originally, I´ll look it up in the books ;)...
I do believe you´re right, I´ve just found this:
I saw some caliber 1003 plates being produced at Vacheron Constantin's Vallee de Joux facilities this past May. VC has taken over the manufacturing of this movement from JCL, which was the original manufacturer of this exclusive caliber (only AP and VC have used it)
AP probably has a stock of them that it can draw on for its needs, if any. The ultrathin 1003 is important to VC, I don't see it being important for AP. It is used for skeleton watches and for the Historiques 1955....
Last edited by Geronimo; 19th August 2012 at 12:04.
Longines hand wound from the 70's
Seiko 6r20 movement,
- - - Updated - - -
Oris Movement
The only movement pics I have are of vintage watches which I prefer. They are a bit more prosaic, not quite as fancy but IMO just as interesting...
Hamilton Micro rotor.. without this the cal 11/12 auto Heuers, Breitlings etc would not have been possible
Seiko 6218
WWW Longines..
1940's UG cal 285
Flightmaster 911..
1940's IWC calibre 88
My oldest Seiko movement, from a Unique.
Felsa Bidynator. The first full rotor auto that wound the watch in both directions of travel.
Cheers,
Neil.
Oh that's very neat! I should have realised, it's obvious once it is pointed out.The regulator on the right adjusts the timekeeping +/- seconds per day. The one on the left adjusts the beat error which is the difference between the balance wheel swinging in one direction to the other, usually measured in milliseconds.
Here's a couple of mine:
Omega Chronostop
Universal Polerouter
I like a good display back!
I've got some that are very similar to yours, Tony.
GO PML XL
JLC Master Moon
Plus some others
PAM 312
GO Seventies
AP 15300
And one that you can see from the front!
This is the movement from my GP Seahawk. I should get a better picture.. but I'm not in the habit of opening my watches when I don't have to!
And a JLC MC
Last edited by java; 19th August 2012 at 17:31.
All Seiko's and none are decorated I'm afraid.
6217a:
1957 Marvel:
SBGM023:
6105b
5717a
6206b
7S36
I have only one display back (of note) these days...
Which you can also see (a bit) from the front
z
Eddie
Whole chunks of my life come under the heading "it seemed like a good idea at the time".
Some fantastic movements already posted, my only display back is a Parmigiani Fleurier PF331.
My limited photo skills, poor light and a Cybershot produced this:
IWC portuguese Perpetual Calendar:
IWC Ingenieur 3228:
Seiko Spring Drive Moon Phase:
Striking tenth
Pilot big date
1904MC
1940s Heuer single button Chronograph featuring E.Gübelin signed movement
Vintage Sturmanskie 3133...
Vintage Omega cal 625...
Vintage Rolex GMT...
Vintage Astral Jump Hour...
Vintage Zenith Defy...
Tag Heuer Monza Calibre 36 (El Primero)...
Vintage Poljot Alarm...
Vintage Speedmaster Cal 321...
Anonimo Chronoscopio...