Hi guys, or any prs11 owners,
As above? is it a crown issue or the stem is too short to disengage the hack function?
Or should i order a new crown- faulty internal spring?
Let me know
Many thanks,
Eric
Sent from my iPhone using Tapatalk
Hi guys, or any prs11 owners,
As above? is it a crown issue or the stem is too short to disengage the hack function?
Or should i order a new crown- faulty internal spring?
Let me know
Many thanks,
Eric
Sent from my iPhone using Tapatalk
It sounds like the stem's too short.
Hi Duncan! thanks i will highlight this to my local watchmaker he says there's a possibility the spring in the crown is too weak to engage the hack system, what are your thoughts on this?
Sent from my iPhone using Tapatalk
question about the bezel it only takes a gentle touch for the bezel to turn, i have checked the click spring is present anyway i can 'tighten the action?'
Sent from my iPhone using Tapatalk
just got the watch back from the watchmaker, there is a gap now he told me it is inevitable please see attach photoa
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/201...168b3970ce.jpg
Sent from my iPhone using Tapatalk
You can adjust the click-ratchet pawl angle this can definitely make the turning easier or harder.
Yup a longer stem and you can get the gap you mention.
thanks bryan phew thought i was seeing it wrong, just be sure i ordered spare crown and tube incase it all
goes down wrong
Sent from my iPhone using Tapatalk
Another thing over long stems can cause casetube threads or crowns threads to strip.
got it
Sent from my iPhone using Tapatalk