The problem with adding extra holes to these straps is that the buckle will be around the side of the wrist.
Printable View
I don't complain. I have fat wrists and the supplied straps are just fine for me with the buckle tang in the middle hole. I often have to bypass nice straps because they are to short. Often I have had to get a new strap as the first thing when getting a new watch. But the PRS-30 was a nice surprice for me in that respect.
Whatever, the length of the supplied straps shouldn't get between anyone and an otherwise fine watch. There are lots of straps out there in shorter lengths.
^
My feelings exactly. Too many girly wrists on here!
Solved the problem! I got another hole punched through the strap and it fits perfect now on my girly 7.5" wrist.
http://i567.photobucket.com/albums/s...8/IMG_0696.jpg
The buckle is at the side of my wrist but all the extra is in the middle of my wrist and I am happy with it now.
UPS has finally quit dodging me and my PRS-30 is now on my wrist! Kudos to Eddie (and Chris) on an absolutely class package. This watch is so solid and so very comfortable. Mine arrived on brown, which compliments it well. Photos fail to adequately capture the brown-ness of the dial, especially when viewed from an angle. It is an original. It is just right! I can't wait for the patina to develop....
https://dl.dropboxusercontent.com/u/...Z-UK/PRS30.jpg
Dispatched!
First TF, first bronze and first ETA auto.
Any black strap recommendations for a <7" wrist? Anything similar to what is supplied would be good. Preferably on the cheaper side as I am hoping Eddie will stock shorter versions of these at some point.
Hirsch Liberty. Available from many internet sources (bu likely not from your local watch shop). Do a Google search. The Hirsch liberty comes with a stainles steen buckle with a narrow tang, fitting the small holes. However, when you have found which hole(s) you will use, you can manage to sqeeze in the bronze buckle from the original strap in place of the steel one and widen the used hole(s) to fit the broader tang. (I tried it with a Hirsch Liberty I had lying around and it works).
Hirsch liberty has small, round holes that likely will not fit the bronze buckle.
I see.
What was the booklet like that went off to be printed (rather that a tri-fold) sheet?
You can see it in one of my earlier posts. Pic posted again for ease. The booklet is nice, it's certainly a lot better than the folded piece of A4. It adds to the overall feel of quality of the package.
Happy to post more pics of it once I'm home if you like?
https://lh6.googleusercontent.com/-2...o/IMG_0295.JPG
Thanks for the reply Sean. Hope you are enjoying the watch.
Ordered mine on Tuesday morning and it was hidden in our garden in rural Southern Germany by UPS on Wednesday afternoon when I got home from work.
What can I say, all pictures that I have seen so far, are great, but in real life the watch is even more amazing.
The "mink" dial is sometimes slate grey, sometimes black or brown and sometimes with a hue of purple.
The domed crystal is a joy to look at from the side and if a famous gladiator of the Roman Empire would have selected a watch, this would be it ;-)
I have an 8 inch wrist and I first wore it on the fourth smallest, now on the third smallest hole (not pretty pics, just another 8 in wrist shot, to get Eddies hairy arm out of my head :-)
http://up.picr.de/15581527cs.jpg
http://up.picr.de/15581526hs.jpg
Congratulations, that look great. Like you say, pics don't do it justice.
Enjoy.
So frustrating, mine is sitting in "the presents cupboard" until my birthday, on orders from SWMBO. At least it gives me time to wait for the two 120/70 straps to arrive from America.:rolleyes:
Anyone speeded up the patina process on their PRS-30 yet? I had a go on the Maranez brass I had and was quite happy with the results, although I removed it before I sold it on. I think it suits certain bronze divers but not sure if it would on a smarter looking watch like this...
Pics please.
The watch head patinates nicely and quickly with liver of sulphur but the buckle doesn't because it was passivated. The buckle will patinate but at a much slower rate. I didn't know they routinely passivated bronze items to slow down patination or I would have asked them not to.
Eddie
You'll have it for years. I'm just going to let it happen.
I'll post pics of the accelerated process later today. LoS worked a treat on the watch head. Just a quick dip to kick start the process.
I've tried a variety of processes on the buckle too and will post a pic of it's current state. It does not react the same as the head tho'.
I've just ordered some "Sulfur Soap" off eBay, that's supposed to work well with a sponge down.
Eddie
Ok. Head results first - the buckle was done at the same time but it had no impact. A cold solution of Liver of Sulfur dipped for no more than 30 seconds. There is more to the process so do a bit of research:
http://img.photobucket.com/albums/v1...psb9d20f61.jpg
http://img.photobucket.com/albums/v1...psac4786e8.jpg
http://img.photobucket.com/albums/v1...ps6cc2accc.jpg
The buckle has had cold LoS/Hot LoS/Neat LoS/Egg treatment a light rebrushing then more treatments. Then news of passivation so a full wet and dry refinish - removing the logo and then some. Then cold LoS/Hot LoS/Neat LoS and still not much change, so then a heat treatment - blowtorched to red hot three or four times finished off with hot LoS and then neat LoS. It's now a bit duller. Be careful with heat treatment, it shrunk the buckle a little and the screw head now sticks out a bit.
The penny is one of several used to test that the LoS is active and it turns black in less than 10 seconds - I use a strong solution.
If a bit of sulpur soap works I'll be amazed. However the buckle differs from the head it's a stubborn bustard.
http://img.photobucket.com/albums/v1...ps14ce5e86.jpg
http://img.photobucket.com/albums/v1...ps0f550eee.jpg
http://img.photobucket.com/albums/v1...pse708cc82.jpg
It looks good but I'm hoping to live long enough for it to happen naturally - and keep the P logo on the buckle. Better watch out for that bus that's bearing down on me!
I let the time do the work, but great efforts and pictures from Gray, thanks for sharing.
What is great news is the fact that the crown reacts just as the case, perfect match.
A stainless or titanium crown on a bronze watch like so many others do, does not compare to Timefactors strive for the perfection bronze watch.
Treating watches with hard boiled eggs and sulphur soap! Now, that really proves that being a WIS is a serious mental desease. Don't ever tell anyone outside these cirkles or they'll have us all locked up. :eek:
BTW, wasn't sulphur sope something we used against acne when we were teenagers?
During the dialogue with Eddie on the differing reaction of the buckle, and inbetween processes, he offered to replace it once a... errrr... less invasive method was identified. I would now describe the test buckle as having the patina of a knackered house key :BangHead:
Mine has already started to darken and patinate. I'm just going to let it happen naturally and enjoy watching the change.
Mine is noticeably darker than when it arrived, ageing nicely.
It's going to be a long while before it is finished.
I think it had been mentioned before, it also depends on the skin/sweat agressiveness of the person who wears the watch on how quick it patinates.
I dont takes watches off while sleeping so that is another 8 hours towards the process.
The inside of the buckle that touches the skin is already quite dark as well.
85 has arrived!
Perfect size, amazingly comfortable on the wrist and looks just as good as expected :D
Just got to source a strap that fits now.
I thought I'd boil an egg again......
Before :
http://i203.photobucket.com/albums/a...821_104941.jpg
.... and after 5mins in a bag with the egg :
http://i203.photobucket.com/albums/a...823_132828.jpg
Natural ageing for mine, with a little help from the sea and the sea air.
http://i380.photobucket.com/albums/o...psf9832ba1.jpg
http://i380.photobucket.com/albums/o...ps4c476c9e.jpg
http://i380.photobucket.com/albums/o...ps109967fc.jpg
Very nice!
I prefer the natural ageing but the accelerated ageing doesn't look bad.
Eddie
That looks good. Have you done a bit of polishing to the lugs there Alphajet?
I might get a hole punched but it does push the buckle round a bit far which makes it a tad uncomfortable.
Mine is in the middle hole. Just for once I don't need to buy a new, longer strap. Looks great.
1 extra hole = 5mm on mine and I did not notice the difference.
The buckle and the extra strap and the leather keeper are all bang in the middle of my wrist.
This looks to be right on my monitor for the colour of the dial but what this picture shows very well (an accident) is the sandwich dial.
http://www.tz-uk.com/pics/sandwichdial.jpg
Eddie
So is the patina meant to eventually be the same colour as the dial, or is this a happy coincidence? Looks great by the way.
On my laptop that's good match to the dial under electric light but in most daylight conditions I see more of a hint of chocolate. Patina on the case and strap choice seem to influence the way the dial looks too. It certainly shows the sandwich well, and the contrast of the dial with the hands. In a lot of light conditions I find the overall combination kind of smokey - verging on the stealthy